Accumulator Charging Valve (Brake) - Assemble
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install relief valve (14) and the seals to manifold (1). Tighten relief valve (14) to a torque of
48 ± 3 N·m (35 ± 2 lb ft) . - Install sequence valve (12) and the seals. Tighten sequence valve (12) to a torque of
37 ± 3 N·m (27 ± 2 lb ft) . - Install pressure valve (11) and the seals. Tighten pressure valve (11) to a torque of
35 ± 1 N·m (26 ± 1 lb ft) . - Install fittings (13), (15), (10), (9), and the O-ring seals.
- Install shuttle valve (8) and the seals. Tighten shuttle valve (8) to a torque of
35 ± 2 N·m (26 ± 1 lb ft) . - Install check valve (7) (not shown) and the seal. Tighten check valve (7) to a torque of
25.8 ± 1.4 N·m (228.35 ± 12.39 lb in) .Show/hide table
Illustration 2 g03730123 - Install check valve (6) and the seal to manifold (1). Tighten check valve (6) to a torque of
25.8 ± 1.4 N·m (228.35 ± 12.39 lb in) . - Install pressure sensor (5). Tighten pressure sensor (5) to a torque of
62 ± 6 N·m (46 ± 4 lb ft) . - Install plug (4) and the O-ring seal.
- Install the orifice. Hand tighten the orifice. Install the O-ring seal and plug (3).
- Install fittings (2) and the O-ring seals.
Show/hide table
| |
| Illustration 1 | g03730203 |
End By:
- Install the brake accumulator charging valve.
Caterpillar Information System:
785G Off-Highway Truck Systems Brake Accumulator (Service)
794 AC Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Install
794 AC Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Remove
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Rated Load
785G Off-Highway Truck Systems Brake Valve (Parking)
PL83 and PL87 Pipelayers Hook Load Line - Install
Installation of Heater Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1074, 1317, 664E} Installation of Heater Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1074, 1317, 664E}
Rework Procedure to Replace the Lever in the Propel Lever Group on Certain PS-150C and PS-360C Paving Compactors{3065} Rework Procedure to Replace the Lever in the Propel Lever Group on Certain PS-150C and PS-360C Paving Compactors{3065}
C4.4 Engines for Caterpillar Built Machines Engine Design
QUICK COUPLERS Quick Coupler
C7 and C9 Industrial Engines Electrical Power Supply - Test
2015/07/07 New Software Is Now Used On Certain M Series Motor Graders {1920, 7620}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
785G Off-Highway Truck Systems Brake Accumulator
2015/02/13 A New Shaft and Gears Are Used on the Camshaft Drives of Certain 3516B Off-Highway Truck Engines {1207}
C7 and C9 Industrial Engines Ether Starting Aid - Test
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Disassemble
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201} Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Assemble
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Relief Valve - Test and Adjust - Steering Cylinder Work Port
C7 and C9 Industrial Engines Indicator Lamp - Test
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System Bank Valve (Backhoe) - Pilot Operated
785G Off-Highway Truck Systems Brake Valve (Parking) - If Equipped
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Service) - Remove and Install