Accumulator Charging Valve (Brake) - Remove and Install
Start By:
- Remove the parking brake control valve.
- Disconnect clip (1) from the plate. Move clip (1) and the harness assembly out of the way.
Show/hide table
Illustration 2 g03729690 - Disconnect tube assembly (2).
- Disconnect fitting (3) in order to move hose assembly (4) out of the way.
Show/hide table
Illustration 3 g03729693 - Disconnect tube assembly (5).
- Disconnect fitting (6) in order to move hose assembly (7) out of the way.
Show/hide table
Illustration 4 g03729708 - Disconnect hose assemblies (8), (9), and (10).
- Disconnect harness assembly (11).
- Disconnect clip (12) from brake accumulator charging valve (13).
Show/hide table
Illustration 5 g03729766 - Remove tube assembly (16).
- Disconnect tube assembly (15).
- Disconnect hose assembly (17).
- Remove bolt (14), the washer, and brake accumulator charging valve (13).
Show/hide table
| |
| Illustration 1 | g03729683 |
- Install brake accumulator charging valve (13) in the reverse order of removal.
Caterpillar Information System:
785G Off-Highway Truck Systems Gear Pump (Brake, Front Brake Cooling, HVAC)
785G Off-Highway Truck Systems Solenoid Valve (Steering)
PL83 and PL87 Pipelayers Engine Air Filter Secondary Element - Replace
PL83 and PL87 Pipelayers Engine Air Filter Primary Element - Clean/Replace
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lift and Tilt Cylinder Drift - Check
785G Off-Highway Truck Systems Solenoid and Relief Valve (Steering)
785G Off-Highway Truck Systems Hydraulic Tank and Mounting
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Neutralizer Switch - Integrated Braking System (IBS)
Assemble Procedure for Pads for Use with Clam Shell (MP) Buckets{6104} Assemble Procedure for Pads for Use with Clam Shell (MP) Buckets{6104}
785G Off-Highway Truck Systems Check Valve (Steering)
AP255E Asphalt Paver Propel System Flushing Valve (Propel Pump) - Test
C7 and C9 Industrial Engines Engine Cranks but Does Not Start
785G Off-Highway Truck Systems Relief Valve (Cylinder Crossover)
The Brake System Pump is Failing on Certain 793F Off-Highway Trucks{5073} The Brake System Pump is Failing on Certain 793F Off-Highway Trucks{5073}
C7 and C9 Industrial Engines Engine Has Mechanical Noise (Knock)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0688 - FMI 06
C7 and C9 Industrial Engines Air Shutoff - Test
C4.4 Engines Valve Position - Test
C4.4 and C7.1 Engines Water in Fuel - Test
C4.4 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
C3.4B Engines NOx Sensor - Test
C4.4 Engines for Caterpillar Built Machines Ammonia Sensor - Remove and Install - Ammonia Sensor if Equipped
785G Off-Highway Truck Systems Steering Gear
Procedure to Install the 460-7644 Fuel Lines Gp on Certain 24M Motor Grader Engines{1274} Procedure to Install the 460-7644 Fuel Lines Gp on Certain 24M Motor Grader Engines{1274}