C7.1 Marine Engine Caterpillar


Flywheel Housing

Usage:

C7.1 JME



Illustration 1g03722977



Illustration 2g03722978

Bolt tightening sequence

Note: Tighten all bolts in a numerical sequence as shown in Illustration 2.

Before assembly, apply Loctite 243 to the threads of the two bolts (1). Tighten the two bolts (1) to the following torque. ... 240 N·m (177 lb ft)

Before assembly, apply Loctite 243 to the threads of the six bolts (2). Tighten the six bolts (2) to the following torque. ... 70 N·m (52 lb ft)

Tighten 6I-0847 Plug (3) to the following torque. ... 55 N·m (41 lb ft)

Tighten 8M-9307 Plug (4) to the following torque. ... 20 N·m (177 lb in)

Caterpillar Information System:

C3.4B Engines Electrical Power Supply - Test
3516C and C175-16 Engines Selective Catalytic Reduction Configuration Parameters
CAT Water Delivery System (WDS) and 777G WTR OEM Off-Highway Truck/Tractor Pump Drive - Assemble
C18 Fire Pump Engine Model View Illustrations
C18 Fire Pump Engine Engine Electronics
Air Conditioning and Heating R134a for All Caterpillar Machines General Troubleshooting Information
Air Conditioning and Heating R134a for All Cat Machines General Information
Troubleshooting Procedure for the AGC-4 Generator Controller{4490} Troubleshooting Procedure for the AGC-4 Generator Controller{4490}
794 AC Off-Highway Truck Final Drive Oil - Change
Spring Isolator Installation and Adjustment Procedure for Certain Generator Sets with 3500 Gas Engines{1021, 7002} Spring Isolator Installation and Adjustment Procedure for Certain Generator Sets with 3500 Gas Engines{1021, 7002}
XQC1200 and XQC1600 Power Modules Generator - Remove and Install
C7.1 Marine Engine Engine Coolant Pressure Sensor
C7.1 Marine Engine Flywheel
C7.1 Marine Engine Turbocharger
C7.1 Marine Engine Fuel Injection Lines
C7.1 Marine Engine Fuel Filter Base
C7.1 Marine Engine Fuel Manifold (Rail)
C7.1 Marine Engine Exhaust Manifold
2015/02/10 New Bearings with a Reduced Inside Diameter are Available for the Elimination of Radial Play in the Front Linkage for Certain D Series and E Series Excavators, Forest Machines, and Mobile Hydraulic Power Units {6513}
3516E Generator Set Engine Aftercooler - Two Stage Aftercooler
C0.5 and C0.7 Industrial Engines Severe Service Application
XQC1200 Power Module Fan Motor - Lubricate
XQ2000 Power Module Fuel Tank Strainer - Clean
XQ125 Generator Set Clean Emissions Module Support - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.