Crankcase Breather
Show/hide table
Illustration 1 | g03722410 |
(1) (2) (3) Tighten the bolts to the following torque. ... 22 N·m (16 lb ft)
(4) Tighten the bolts to the following torque. ... 44 N·m (32 lb ft)
Note: If a hexagonal pillar spacer is required, install the spacer to the engine oil cooler. Tighten the spacer to a torque of 22 N·m (16 lb ft).
Caterpillar Information System:
C7.1 Marine Engine Engine Oil Pan
C4.4 Engines for Caterpillar Built Machines Temperature Sensor (Exhaust) - Selective Catalytic Reduction (SCR) Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Ammonia Sensor - If equipped
C4.4 Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant)
C175-16 PETROLEUM ENGINES Engine Oil Pump - Remove and Install
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Operating Parameters - Set
C175-16 PETROLEUM ENGINES Fuel Filter Housing - Remove and Install
Product Shipping and Handling Guidelines for Certain Uninterruptible Power Supplys (UPS){4480} Product Shipping and Handling Guidelines for Certain Uninterruptible Power Supplys (UPS){4480}
2014/09/11 Cat® Reman Now Offers New Turbocharger and Cartridge Groups for Certain Machine Engines {1052, 1053}
C3.4B Engines DEF Tank Sensor - Test
C3.3 Industrial Engine Fuel System Secondary Filter - Replace
C3.3 Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C7.1 Marine Engine Belt Tensioner
C7.1 Marine Engine Engine Lifting Bracket
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Valve (Water) - Assemble
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Maintenance Interval Schedule
C3.4B Engines ECM Memory - Test
CAT Water Delivery System (WDS) and 777G WTR OEM Off-Highway Truck/Tractor Piston Pump (Water Delivery) - Remove and Install
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Gear Pump (Charge) - Remove and Install
C7.1 Marine Engine Engine Coolant Pressure Sensor
XQC1200 and XQC1600 Power Modules Generator - Remove and Install
Spring Isolator Installation and Adjustment Procedure for Certain Generator Sets with 3500 Gas Engines{1021, 7002} Spring Isolator Installation and Adjustment Procedure for Certain Generator Sets with 3500 Gas Engines{1021, 7002}
794 AC Off-Highway Truck Final Drive Oil - Change
Troubleshooting Procedure for the AGC-4 Generator Controller{4490} Troubleshooting Procedure for the AGC-4 Generator Controller{4490}