A New Strap is Now Used to Reduce Vibration of the Glow Harness on Certain 303E CR Mini Hydraulic Excavators {1408}
- Mini Hydraulic Excavator
- 303E (S/N: CR71-UP; SMG1-UP)
Reference: Service Magazine, M0073592, "An Updated Battery Wiring Group is Now Used on 303E Mini Hydraulic Excavators"
Description Of Change: A new strap has been added to maintain the position of the glow harness on the machines listed above. The strap has been added to bind the glow wire to prevent the wire from moving and possible cracking the ring terminal.
Show/hide table
Illustration 1 | g03688422 |
Show/hide table
Illustration 2 | g03689051 |
View A-A |
Adaptable To: Illustration 1 shows the location where the 204-1611 Strap (1) has been added to avoid cracks in the 2L-8049 Ring Terminal. Table 1 shows the effectivity and adaptability of the strap. Apply the strap if your machine does not have a strap in the location shown.
Show/hide table
Effectivity and Adaptability of the New Strap | ||
---|---|---|
Model | Effectivity | Adaptability |
303E CR | S/N:SMG395-UP | S/N:SMG1-394 |
S/N:CR7208-UP | S/N:CR71-207 |
Refer to Service Magazine, M0073592 for an update to the engine low idle speed.
Caterpillar Information System:
2014/07/07 New Machine Software to Control Engine Speed is Now Used on E Series Excavators {7610, 7620}
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement Fan - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Relief Valve (Line) - Test and Adjust
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement Fuel Shutoff Solenoid - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Relief Valve (Main) - Test and Adjust
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement Fuel Filter and Water Separator Base - Remove and Install
336D2 and 340D2 Excavators Engine Starting
336D2 and 340D2 Excavators Air Conditioning and Heating Control
336D2 XE Excavator Monitoring System
725C2 and 730C2 Articulated Truck Machine System Window Guard - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Solenoid Valve (Proportional Reducing) - Calibrate - Power Shift Pressure
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Diagnostic Trouble Codes
303.5E2 CR, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Engine Supplement Refrigerant Compressor - Remove and Install
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Flood Lamp
318D2 Excavator Systems Main Hydraulic System
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Oscillating Axle (Rear) - Remove and Install
M318F, M320F and M322F Wheeled Excavators Hydraulic System General Information (Machine System)
M318F, M320F and M322F Wheeled Excavators Hydraulic System Location of Components (Machine System)
M318F, M320F and M322F Wheeled Excavators Hydraulic System Electronic Control (Machine System)
336F Excavator Solenoid Return - Test
M318F, M320F and M322F Wheeled Excavators Hydraulic System General Information (Pilot System)
M318F, M320F and M322F Wheeled Excavators Hydraulic System Location of Components (Pilot System)
M318F, M320F and M322F Wheeled Excavators Hydraulic System Electronic Control (Pilot System)
BR624 Work Tool Maintenance Interval Schedule