Final Drive and Wheel
Show/hide table
Illustration 1 | g03647376 |
Show/hide table
Item | Qty | Part | Specification Description |
1 | 3 | 8T-5091 Bolt | Torque to |
2 | 3 | 105-8743 Bushing | Before assembly, thoroughly coat the bushing with the clean final drive lubricant.
Outside diameter before assembly is Thickness is |
3 | 1 | 4H-6730 O-Ring Seal | Lubricate the seal lightly with the lubricant that is being sealed. |
4 | 30 | 6V-8133 Bolt | Torque to Tighten to an additional turn of 120 ± 10 degrees. |
5 | 1 | 6D-0692 O-Ring Seal | Lubricate the seal lightly with the lubricant that is being sealed. |
6 | 1 | 8K-0079 Terminal Bushing | Inside diameter before assembly is |
7 | 6 | 6V-5844 Bolt | Torque to |
8 | 2 | 099-4691 Locking Bolt | Torque to Before assembly, apply 8C-8422 Sealant to the threads. |
9 | 10 | 8T-2393 Bolt | Torque to Tighten to an additional turn of 120 ± 10 degrees. |
10 | 1 | 8M-3837 Magnetic Plug | Lubricate the threads lightly with the lubricant that is being sealed.
Torque to |
11 | 1 | 9S-4205 Plug | Lubricate the threads lightly with the lubricant that is being sealed.
Torque to |
12 | 1 | 9G-5319 Duo-Cone Seal Gp | Rubber toric seals and all surfaces in contact with seals must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. Seal rings must be assembled square with the bore. Toric seals must not bulge. Toric seals must not twist. |
13 | 1 | 6V-4244 O-Ring Seal | Lubricate the seal lightly with the lubricant that is being sealed. |
Caterpillar Information System:
Command for Underground Operations Area Map
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (Hydraulic System)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Combustion Head - Remove and Install - Clean Emissions Module
16M Series 3 and 18M Series 3 Motor Grader Control Manifold (Implements)
RM500B Rotary Mixer Monitoring System
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Steering System)
RM500B Rotary Mixer Radiator and Hydraulic Oil Cooler - Clean
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Steering System)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
16M Motor Grader Lubrication Pump Oil - Change - Autolube
16M Motor Grader Lubrication Pump Oil Level - Check - Autolube
424B and 424B HD Backhoe Loaders Transmission (Standard Shift) Transmission Control
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Transfer Gears and Case
424B and 424B HD Backhoe Loaders Transmission (Standard Shift) Transmission Hydraulic System
424B Backhoe Loader Transmission (Standard Shift) Transmission Hydraulic System
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Air Cleaner
424B Backhoe Loader Transmission (Standard Shift) Pressure Taps
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Hydraulic Tank
C4.4 Engines for Caterpillar Built Machines Idler Gear - Remove
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Monitor and Mounting
C4.4 Engines for Caterpillar Built Machines Idler Gear - Install
C4.4 Engines for Caterpillar Built Machines Housing (Front) - Remove
C4.4 Engines for Caterpillar Built Machines Housing (Front) - Install
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Fuel Cooler