Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
- Caterpillar Products:
- All Machines
A component parts list will be provided in the Numerical Parts Record (NPR) indicating the consist parts list. Two new Jump Start Receptacle part numbers have been released without terminals. The new part numbers are 389-1970 Receptacle As with 100 cm wire and 397-5681 Receptacle As with 200 cm wire. NPR consist will include one of the two new part numbers. Information for the proper wire length and terminal orientation will also be included in the NPR. Wire length dimension is measured from where the wire exits the receptacle.
Show/hide table
 | |
| Illustration 1 | g03633580 |
Jump Start Receptacle Orientation | |
The Illustration 1 represents the possible terminal orientations.
Caterpillar Information System:
G3304B and G3306B Engines Before Starting Engine
390F Excavator C18 Engine Supplement Electronic Control (Diesel Exhaust Fluid) - Remove and Install
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Fuel System Operation
C175-16 Petroleum Generator Set Engines Jacket Water Heater - Check - If Equipped
390F Excavator C18 Engine Supplement Electronic Control (Aftertreatment) - Remove and Install
D6T Track-Type Tractor DEF Filler Screen - Clean - Emission Related Component
C175-16 Petroleum Generator Set Engines Fuel System Primary Filter/Water Separator - Drain
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Engine Oil Pressure - Test
2014/04/04 An Improved Water Tank Is Used for Certain C175-16 Commercial Engines {1063}
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Glow Plugs - Inspect
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Electronic Control Module (ECM) - Integrated Sensing Module (ISM)
Integrated Voltage Regulator {4467, 4490} Integrated Voltage Regulator{4467, 4490}
C4.4 Marine Generator Set Oil Temperature Is High
390F Excavator C18 Engine Supplement Voltage Control (Load Protection) - Remove and Install
390F Excavator C18 Engine Supplement Solenoid Valve (DEF Heater Coolant) - Remove and Install
C4.4 Marine Generator Set Gauges and Indicators
C4.4 Marine Generator Set Emergency Stopping
390F Excavator C18 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Outlet
C4.4 Marine Generator Set Manual Stop Procedure
C4.4 Marine Generator Set Exhaust Temperature Is High
2014/02/21 New Color Marine Power Display Software Is Used on Certain Marine Engines {7490, 7620}
C4.4 Marine Generator Set After Stopping Engine
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Walk-Around Inspection
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Water Pump - Inspect