Service Tools
使用下列维修工具来帮助诊断和排除电气系统故障。
Show/hide table
工具清单 |
说明 |
带 Cat 电子技师 (Cat ET) 软件的笔记本电脑,用于 Product Link PL121SR/PL300 系统 |
数字万用表 |
接头修理套件 |
端子修理套件 |
压接工具 |
标准套筒扳手套件(1/2 In 驱动头) |
公制套筒扳手套件(1/2 In 驱动头) |
手动工具总成(螺丝刀) |
扭矩扳手(1/2 in 驱动头) |
关于 Deutsch"DT"型接头的维修说明,请参阅专门说明书, SEHS9615。
使用数字万用表进行导通性检查或电压测量。
Caterpillar Information System:
Product Link 121S/300 General Information
140 Motor Graders Service Brake
Product Link 121S/300 Commands
Product Link 121S/300 Spare Input Configure
Product Link 121S/300 Wireless Service Configure
Product Link 121S/300 Report Parameters Configure
Product Link 121S/300 Installation Parameters Configure
Product Link 121S/300 Configuration
14L Motor Grader Hydraulic and Steering System Steering Cylinder (All Wheel Drive)
Product Link 121S/300 Spare Inputs
Product Link 121S/300 System Components
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Fuel Lines
415F2 Backhoe Loader Stopping the Engine if an Electrical Malfunction Occurs
416F2, 420F2 and 430F2 Backhoe Loaders Engine Oil and Filter - Change
2014/01/31 A Procedure Is Available to Avoid Temperature Fault Codes on the AP300 Asphalt Paver {7620}
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Display Module
416F2, 420F2 and 430F2 Backhoe Loaders Fuel Tank Water and Sediment - Drain
Product Link 121S/300 Diagnostic Capabilities
Product Link 121S/300 Electronic Service Tool Does Not Communicate with ECM
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Stall and Implement Pump Double Stall - Test
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Menus
Product Link 121S/300 Position Reports Not Available
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Settings Menu
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Totals Menu