2014/01/31 Caterpillar


A New Stub Shaft Is Available for 3500 Commercial Engines {1359}

Usage:

793B 1HL
Engine:
  • All 3500 Engines
  • The new stub shaft is made exclusively from high grade ductile iron.

    The new 449-7383 Stub Shaft is a direct replacement for the 7N-7057 Stub Shaft. The existing 7N-7057 Stub Shaft can be constructed from both steel and cast iron.

    Caterpillar Information System:

    C4.4 Marine Generator Set High Pressure Fuel Lines
    G3600 A4 Engines Ignition Secondary - Test
    G3600 A4 Engines Ignition Primary - Test
    Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490} Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
    2013/12/20 An Alternate Fuel Pressure Gauge for Improved Durability in Some Generator Set Applications {7456}
    C-10, C-12 and C-15 On-Highway Engines Maintenance Interval Schedule - C-15 Truck Engine
    G3516 TA Engine Engine Shutdown or Start Inhibit Initiated by Driven Equipment
    C-10, C-12 and C-15 On-Highway Engines Maintenance Interval Schedule - C-10 and C-12 Truck Engines
    2013/12/23 New Improved Engine Control Software Is Now Available for Certain T4 Interim C13 Industrial Engines Used in Haliburton ADP Blender Applications {7610, 7620}
    G3600 A4 Engines Exhaust Temperature - Test
    G3600 A4 Engines General Information (Air Inlet and Exhaust System)
    G3600 A4 Engines Electronic Control System Operation
    390F Excavator Machine System System Pressure - Release
    2014/02/06 A New Air Intake Hose Between the Air Cleaner and the Turbocharger is Now Available for Certain Excavators {1071}
    390F Excavator Machine System Operational Checks
    C4.4 Marine Generator Set Model View Illustrations
    390F Excavator Machine System Travel on Level Ground - Test
    390F Excavator Machine System Travel on Level Ground - Test - Optional Test
    390F Excavator Machine System Swing Speed and Overswing on Level Ground - Check
    390F Excavator Machine System Swing Speed and Swing Drift on a Slope - Check
    390F Excavator Machine System Cylinder Drift - Check - Empty Bucket
    390F Excavator Machine System Cylinder Drift - Check - Loaded Bucket
    390F Excavator Machine System Cylinder Speed - Check
    2014/04/11 New Fuel Transfer Pumps Are Now Used for Certain C27 and C32 Commercial Engines {1256}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.