992K Wheel Loader Systems Caterpillar


Position Sensor (Lift Linkage, Tilt Linkage)

Usage:

992K KK2


Illustration 1g06217841

Table 1
Item  Qty  Part  Specification Description 
Nut  Torque to 60 ± 6 N·m (44 ± 4 lb ft)
Sensor type is inductive proximity.
Output type is single ( normally open ) pull ( sink ). 

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
24 Motor Grader Engine Crankcase Breather - Clean
D10T2 Track-Type Tractor Engine Air Precleaner - Clean
D8T Track-Type Tractor General Information (Steering System)
D8T Track-Type Tractor Systems Location of Components (Steering System)
D7E Track-Type Tractor Track Adjuster and Recoil System - Check/Adjust
D10T2 Track-Type Tractor Electronic Unit Injector - Inspect/Adjust
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Power Train Oil Filter Bypass Valve - Remove and Install
D10T2 Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
D10T2 Track-Type Tractor Cooling System Coolant Level - Check
D8T Track-Type Tractor Systems Piston Pump (Fan Drive)
2014/01/07 An Improvement to the Right Engine Enclosure Door Latch Is Now Used {1150, 7251, 7251}
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
950 GC Wheel Loader Machine Systems Front Wiring
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Rear)
D6N LGP OEM Track-Type Tractor Power Train System Torque Converter Mounting
950 GC Wheel Loader Machine Systems Window Wiper and Wiper Motor
950 GC Wheel Loader Machine Systems Window Washer
950 GC Wheel Loader Safety Messages
950 GC Wheel Loader Additional Messages
950 GC Wheel Loader Machine Systems Air Conditioner
627K Wheel Tractor-Scraper Safety Messages
2013/11/21 Hitch Bearing Grease Hose Routing Improvement Is Now Used on Certain Compact Wheel Loaders {7510, 7540}
950 GC Wheel Loader Machine Systems Air Conditioner Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.