Model View Illustrations
The following engine model views show typical Generator Set features. The operator should become familiar with the locations of these items. Due to individual applications, your engine may appear different from the illustrations.
Show/hide table
| |
| Illustration 1 | g03483557 |
|
Right Hand Side View (1) Breaker box (2) Radiator cap (3) Engine oil filter | |
Show/hide table
| |
| Illustration 2 | g03483559 |
|
Left Hand Side View (4) Oil filler (5) Engine oil level gauge (dipstick) (6) Secondary fuel filter (7) Control panel (8) Fuel filter/water separator | |
Caterpillar Information System:
320D2 Excavator Machine Electronic Control System Connector Locations
320D2 Excavator Machine Electronic Control System Service Tools
308E2 CR and 308E2 SR Mini Hydraulic Excavators High Pressure Fuel Lines
2013/10/17 The Water Temperature Regulator Housing Has Been Improved for Certain C13 Engines {1355, 1393}
C18 Marine Engines Refill Capacities
3500 Engines Flywheel Housing
G3306B Petroleum Generator Set Engines Timing - Calibrate
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Filter
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Engine Oil Filter
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Water Connection Group
CX31-P600 Petroleum Transmission Speed Sensor (Engine) (Torque Converter Output)
2014/07/18 New Power Distribution Panel Groups are Used On Certain Tier 2 3508, 3512, and 3516 Marine Engines {4493, 7451, 7490}
2013/12/05 New Engine Software Is Used On Certain 3516C Engines {1920}
308E2 CR Mini Hydraulic Excavator Final Drive Oil - Change
308E2 CR Mini Hydraulic Excavator Final Drive Oil Level - Check
308E2 CR Mini Hydraulic Excavator Final Drive Oil Sample - Obtain
320D2 Excavator Machine Electronic Control System Diagnostic Capabilities
C13 and C15 Generator Sets Safety Messages
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Electrical Connections
2013/10/21 Recommendations For Parameters and Update Rates On PL1000T For Certain C32, 3500, and G3500 Engines {1926}
C4.4 Industrial Engine Belt Tensioner - Check
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Air Inlet and Exhaust Lines
C4.4 Industrial Engine Belt - Inspect
C18 Petroleum Engine Maintenance Interval Schedule