3500 Engines Caterpillar


Flywheel Housing

Usage:

3512C ED4


图 1g03482780
后视图

表 1
技术规格 - 383-6541 飞轮壳总成 
项目  数量  零件  技术规格说明 
在安装飞轮壳之前,检查飞轮壳的前端面和缸体的后端面。 这些部件必须没有以下物质:机油、燃油、水、密封垫粘合剂、组装固定胶和任何其他异物。 
9X-8875 螺栓  直径为 1/2 inch 的螺栓长度为 88.90 mm (3.500 inch)
拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)。 
6M-9613 螺栓  直径为 1/2 inch 的螺栓长度为 228.60 mm (9.000 inch)
拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)。 
9X-8873 螺栓  直径为 1/2 inch 的螺栓长度为 57.15 mm (2.250 inch)
拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)。 
9S-1374 螺栓  直径为 1/2 inch 的螺栓长度为 203.20 mm (8.000 inch)
拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)。 
16  1D-4590 螺栓  直径为 5/8 inch 的螺栓长度为 120.65 mm (4.750 inch)
拧紧至扭矩为 270 ± 40 N·m (199 ± 30 lb ft)。 
8S-9089 螺栓  直径为 1/2 inch 的螺栓长度为 114.30 mm (4.500 inch)
拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)。 
组装前将蓝色 Loctite 高柔性 GM 涂抹在密封垫的表面上。 

Caterpillar Information System:

G3306B Petroleum Generator Set Engines Timing - Calibrate
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Filter
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Engine Oil Filter
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Water Connection Group
CX31-P600 Petroleum Transmission Speed Sensor (Engine) (Torque Converter Output)
2014/07/18 New Power Distribution Panel Groups are Used On Certain Tier 2 3508, 3512, and 3516 Marine Engines {4493, 7451, 7490}
CX31-P600 Petroleum Transmission Transmission Covers - Dropbox
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Relief Valve (Transmission Hydraulic Control)
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Side PTO, No Retarder
390F Excavator Machine Systems Swing System
2013/10/28 Caterpillar Marine Engine - Proper Operation "Quick Reference" {1000}
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Side PTO, Retarder
C18 Marine Engines Refill Capacities
2013/10/17 The Water Temperature Regulator Housing Has Been Improved for Certain C13 Engines {1355, 1393}
308E2 CR and 308E2 SR Mini Hydraulic Excavators High Pressure Fuel Lines
320D2 Excavator Machine Electronic Control System Service Tools
320D2 Excavator Machine Electronic Control System Connector Locations
C13 and C15 Generator Sets Model View Illustrations
2013/12/05 New Engine Software Is Used On Certain 3516C Engines {1920}
308E2 CR Mini Hydraulic Excavator Final Drive Oil - Change
308E2 CR Mini Hydraulic Excavator Final Drive Oil Level - Check
308E2 CR Mini Hydraulic Excavator Final Drive Oil Sample - Obtain
320D2 Excavator Machine Electronic Control System Diagnostic Capabilities
C13 and C15 Generator Sets Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.