3512B and 3516B Generator Set Engines with Dynamic Gas Blending Caterpillar


Engine Oil Filter

Usage:

3512B FFR


Illustration 1g03482697

Table 1
Specification for 424-9755 Engine Oil Filter Gp 
Item  Qty  Part  Specification Description 
2W-1635 Spring  Length under test force is 102.0 mm (4.02 inch).
Test force is 518 ± 26 N (116 ± 6 lb).
Free length after test is 143.4 mm (5.65 inch)
2W-1969 Bypass Valve  The bypass valve must move freely in the bore 
2S-5100 Manual Valve  Tighten the stem to 4.5 to 6.8 N·m (39.8 to 60.2 lb in)
0L-1143 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft)
165-3931 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft)
6V-3907 O-Ring Seal  Lubricate lightly with lubricant that is being sealed. 

Caterpillar Information System:

3512B and 3516B Generator Set Engines with Dynamic Gas Blending Water Connection Group
CX31-P600 Petroleum Transmission Speed Sensor (Engine) (Torque Converter Output)
2014/07/18 New Power Distribution Panel Groups are Used On Certain Tier 2 3508, 3512, and 3516 Marine Engines {4493, 7451, 7490}
CX31-P600 Petroleum Transmission Transmission Covers - Dropbox
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Relief Valve (Transmission Hydraulic Control)
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Side PTO, No Retarder
390F Excavator Machine Systems Swing System
2013/10/28 Caterpillar Marine Engine - Proper Operation "Quick Reference" {1000}
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Side PTO, Retarder
C4.4 Industrial Engine Fluid Recommendations - Engine Oil
C4.4 Industrial Engine Maintenance Interval Schedule
C32 Marine Engine Maintenance Interval Schedule
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Fuel Filter
G3306B Petroleum Generator Set Engines Timing - Calibrate
3500 Engines Flywheel Housing
C18 Marine Engines Refill Capacities
2013/10/17 The Water Temperature Regulator Housing Has Been Improved for Certain C13 Engines {1355, 1393}
308E2 CR and 308E2 SR Mini Hydraulic Excavators High Pressure Fuel Lines
320D2 Excavator Machine Electronic Control System Service Tools
320D2 Excavator Machine Electronic Control System Connector Locations
C13 and C15 Generator Sets Model View Illustrations
2013/12/05 New Engine Software Is Used On Certain 3516C Engines {1920}
308E2 CR Mini Hydraulic Excavator Final Drive Oil - Change
308E2 CR Mini Hydraulic Excavator Final Drive Oil Level - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.