Transmission Hydraulic Control - Dropbox
Show/hide table
分动箱控制总成 | ||
---|---|---|
零件号 | 2WD 或 4WD | 12 V 或 24 V |
342-6195 | 4 轮驱动 | 12 V |
342-6196 | 4 轮驱动 | 24 V |
342-6197 | 2 轮驱动 | 12 V |
Show/hide table
图 1 | g03477677 |
左视图 |
Show/hide table
技术规格 - 341-8432 变速箱液压控制总成 | |||
---|---|---|---|
项目 | 数量 | 零件 | 技术规格说明 |
1 | 1 | 196-1185 转速传感器总成 | 使用润滑剂稍微润滑即将密封的孔。
拧紧至扭矩为 |
2 | 1 | 214-2485 转速传感器总成 | 拧紧螺栓至 |
3 | 8 | 8T-6912 螺栓 | 拧紧至扭矩为 |
4 | 1 | 8T-4136 螺栓 | 拧紧至扭矩为 |
5 | 2 | 234-5013 温度传感器总成 | 拧紧至扭矩为 |
6 | 1 | 接头 | 拧紧至扭矩为 |
7 | 2 | 236-6222 转速传感器总成 | 拧紧螺栓至 |
8 | 2 | 197-4652 安全阀 | 使用润滑剂稍微润滑即将密封的孔。 |
9 | 2 | 8T-4189 螺栓 | 拧紧至扭矩为 |
10 | 1 | 276-4166 流量控制阀组件 | 使用润滑剂稍微润滑即将密封的孔。
拧紧至扭矩为 |
11 | 1 | 353-5126 螺塞组件 | 拧紧至扭矩为 |
Show/hide table
图 2 | g03477678 |
仰视图 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
---|---|---|---|
5 | 2 | 234-5013 温度传感器总成 | 拧紧至扭矩为 |
12 | 12 | 8T-4908 螺栓 | 拧紧至扭矩为 |
13 | 4 | 096-5866 螺栓 | 拧紧至扭矩为 |
14 | 2 | 162-0177 螺塞组件 | 拧紧至扭矩为 |
15 | 1 | 164-5567 快速断开连接器组件 | 拧紧至扭矩为 |
16 | 12 | 285-9066 螺栓 | 拧紧至扭矩为 |
17 | 1 | 183-3409 螺塞组件 | 拧紧至扭矩为 |
Caterpillar Information System:
2013/10/17 A New Oil Pan Group Is Available for C27 Industrial Engines Used in RH120 Shovels {1302}
390F Excavator Machine Systems Control Valve (Stick Lowering)
795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Oil Filter (Brake)
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies DC Bus Capacitor - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Maintenance Interval Schedule
320D2 Forest Machine Machine System Specifications Pressure Reducing Valve (Boom and Stick Priority)
CX31-P600 Petroleum Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
CX31-P600 Petroleum Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
UPS 250 and UPS 300 Uninterruptible Power Supplies DC Bus Capacitor - Replace
UPS 250 and UPS 300 Uninterruptible Power Supplies Maintenance Interval Schedule
2013/10/21 New Engine Boost Pressure, Back Pressure Sensor Locations and Mounting Kit Are Used on Certain Aftertreatment Applications {1439}
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Capacitor - Replace
2013/12/05 A New Hose and Clamp for the Water Lines Group Are Used for Certain C15 and C18 Engines {1380}
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Integral Pump Drive, Retarder
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Maintenance Interval Schedule
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Capacitor - Replace
2014/04/11 New Engine Software Is Now Used on Certain C15 and C18 Generator Engines {1901, 1920}
C8.7 Marine Engine Before Starting Engine
Certain C18 Marine Propulsion Engines Have Incorrect Overhaul (Top End) and Overhaul (Major) Intervals Published{1000} Certain C18 Marine Propulsion Engines Have Incorrect Overhaul (Top End) and Overhaul (Major) Intervals Published{1000}
C12.9 Marine Engines Coolant Level - Check
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Integral Pump Drive, No Retarder
C15 and C18 Tier 4 Final Engines Engine Valve Lash - Inspect/Adjust
C12.9 Marine Engines Overhaul (Major)
C8.7 Marine Engine Fire Prevention and Explosion Prevention