A New Oil Pan Group Is Available for C27 Industrial Engines Used in RH120 Shovels {1302}
- Industrial Engine:
- C27 (S/N: TWM1-UP)
The new oil pan group is utilized due to the following advantages: increased pan capacity, improved gasket material and improved bolt retention by using longer bolts with spacers.
Note: The new oil pan group and oil lines group updates the previously built engines to the same configuration as the current production Cat 6030 Hydraulic Shovel.
The new 441-3626 Oil Pan Gp replaces the existing 9Y-8809 Oil Pan Gp. The new oil pan group is adaptable back to first production on the serial numbers listed above in RH120 Shovels.
Note: The 188-4641 Engine Oil Lines Gp must be installed with the new 441-3626 Oil Pan Gp .
This change is effective with engine serial numbers TWM3458-UP.
Caterpillar Information System:
390F Excavator Machine Systems Control Valve (Stick Lowering)
795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Oil Filter (Brake)
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies DC Bus Capacitor - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Maintenance Interval Schedule
320D2 Forest Machine Machine System Specifications Pressure Reducing Valve (Boom and Stick Priority)
CX31-P600 Petroleum Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
CX31-P600 Petroleum Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
UPS 250 and UPS 300 Uninterruptible Power Supplies DC Bus Capacitor - Replace
UPS 250 and UPS 300 Uninterruptible Power Supplies Maintenance Interval Schedule
2013/10/21 New Engine Boost Pressure, Back Pressure Sensor Locations and Mounting Kit Are Used on Certain Aftertreatment Applications {1439}
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Capacitor - Replace
CX31-P600 Petroleum Transmission Relief Valve (Transmission Hydraulic Control) - Test and Adjust
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Dropbox
2013/12/05 A New Hose and Clamp for the Water Lines Group Are Used for Certain C15 and C18 Engines {1380}
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Integral Pump Drive, Retarder
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Maintenance Interval Schedule
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Capacitor - Replace
2014/04/11 New Engine Software Is Now Used on Certain C15 and C18 Generator Engines {1901, 1920}
C8.7 Marine Engine Before Starting Engine
Certain C18 Marine Propulsion Engines Have Incorrect Overhaul (Top End) and Overhaul (Major) Intervals Published{1000} Certain C18 Marine Propulsion Engines Have Incorrect Overhaul (Top End) and Overhaul (Major) Intervals Published{1000}
C12.9 Marine Engines Coolant Level - Check
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Integral Pump Drive, No Retarder
C15 and C18 Tier 4 Final Engines Engine Valve Lash - Inspect/Adjust
C12.9 Marine Engines Overhaul (Major)