C15 Petroleum Engine Caterpillar


Maintenance Interval Schedule

Usage:

C15 JDK

When Required

Battery - Replace
Battery or Battery Cable - Disconnect
Coolant Extender (ELC) - Add
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Engine Storage Procedure - Check
Fuel System - Prime

Daily

Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Check/Clean
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Walk-Around Inspection

Initial 250 Service Hours

Engine Valve Lash - Check

Every 250 Service Hours

Air Shutoff - Test
Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil and Filter - Change
Grounding Stud - Inspect/Clean/Tighten
Starting Motor - Inspect

Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)

Coolant Sample (Level 2) - Obtain

Every 500 Service Hours

Belts - Inspect/Adjust/Replace
Turbocharger - Inspect
Water Pump - Inspect

Every Year

Coolant Sample (Level 2) - Obtain
Engine Valve Lash - Check

Every 3000 Service Hours or 3 Years

Coolant (DEAC) - Change
Electronic Unit Injector - Check/Replace
Engine Protective Devices - Check
Engine Speed/Timing Sensor - Clean/Inspect

Every 6000 Service Hours or 6 Years

Coolant Temperature Regulator - Replace

Every 8000 Service Hours or 3 Years

Driven Equipment - Check

Every 12 000 Service Hours or 6 Years

Coolant (ELC) - Change

Every 14 400 L (3750 US gal) of Fuel or 250 Service Hours or 1 Year

Engine Crankcase Breather - Clean
Engine Oil Sample - Obtain
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Hoses and Clamps - Inspect/Replace
Radiator - Clean

Every 114 000 L (30 000 US gal) of Fuel or 1500 Service Hours

Aftercooler Core - Clean/Test
Battery Electrolyte Level - Check

Every 170 400 L (45 000 US gal) of Fuel or 3000 Service Hours

Crankshaft Vibration Damper - Inspect
Engine - Clean
Engine Mounts - Inspect
Engine Valve Rotators - Inspect
Fan Drive Bearing - Lubricate

Every 380 000 L (100 000 US gal) of Fuel or 10 000 Service Hours

Overhaul Considerations

Overhaul

Fan Drive Bearing - Replace

Caterpillar Information System:

C4.4 Industrial Engine After Starting Engine
C4.4 Industrial Engine Configuration Parameters
C4.4 Industrial Engine Diagnostic Flash Code Retrieval
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Maintenance Interval Schedule
CX31-P600 Petroleum Transmission Transfer Gears
2013/10/29 The DPF Parts Freeze Has been Lifted on On-Highway Truck Engines {108F}
CX31-P600 Petroleum Transmission Speed Sensor (Transmission)
Installation of Improved Relays for the Power Distribution Panel Used on Certain 3500 Marine Engines{4493, 7451, 7490} Installation of Improved Relays for the Power Distribution Panel Used on Certain 3500 Marine Engines{4493, 7451, 7490}
G3306B Petroleum Generator Set Engines Gas Pressure - Check and Adjust
2013/10/24 New Engine Software Is Used on Certain G3512E Engines {1920}
G3306B Petroleum Generator Set Engines Air/Fuel Ratio Control - Adjust
G3306B Petroleum Generator Set Engines Diagnostic Trouble Codes
320D2 and 323D2 Excavators Machine Systems Specifications Front Lines - Single Function
CX31-P600 Petroleum Transmission Power Train Electronic Control Module (Electronic Clutch Pressure Control)
390F MHPU Mobile Hydraulic Power Unit Machine System Main Control Valve
CX31-P600 Petroleum Transmission Power Train Pressures
390F MHPU Mobile Hydraulic Power Unit Machine System Solenoid Valve (Proportional Reducing) - Power Shift System
CX31-P600 Petroleum Transmission Transmission Oil Supply
CX31-P600 Petroleum Transmission Relief Valve (Transmission Hydraulic Control) - Test and Adjust
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Capacitor - Replace
2013/10/21 New Engine Boost Pressure, Back Pressure Sensor Locations and Mounting Kit Are Used on Certain Aftertreatment Applications {1439}
UPS 250 and UPS 300 Uninterruptible Power Supplies Maintenance Interval Schedule
UPS 250 and UPS 300 Uninterruptible Power Supplies DC Bus Capacitor - Replace
CX31-P600 Petroleum Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.