Proper Installation of the Wiring Harness for the Dosing Cabinet for Certain 3516C and C175 Engines {1408}
- Engine:
- 3516C (S/N: SKC1-UP; SCJ1-UP; SCK1-UP; SFK1-UP)
- C175-16 (S/N: WYC1-UP)
Proper routing and installation of the wiring from the dosing cabinet to the Cat emission module is important to reduce failures. A loose connection can cause fault codes to be generated.
The 366-0256 Engine Wiring Gp and 368-1477 Control Wiring Gp are shipped loose from the factory. Proper installation of the wiring harness is a repeated process. The process consists of pushing in the harness while threading the wiring harness collar onto the junction box mating connector. This process will fully seat the 6D-8151 Connector As onto the junction box mating connector. Refer to illustrations below.
Show/hide table
Illustration 1 | g03471181 |
Show/hide table
Illustration 2 | g03471183 |
Caterpillar Information System:
2013/10/11 A New Crankshaft Damper Is Used on Certain C18 Marine Engines {1205}
C15 Petroleum Engine Reference Information
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor - Remove and Install
C280-08 Marine Engine Engine Oil - Change
C4.4 Industrial Engine Sensors and Electrical Components
C280-08 Marine Engine Air Shutoff - Test
C280-08 Marine Engine Aftercooler Condensation - Drain
C15 Petroleum Engine Product Description
C280-08 Marine Engine Fluid Recommendations
C280-08 Marine Engine Refill Capacities
C280-08 Marine Engine Product Lifting
C280-08 Marine Engine Product Description
CX31-P600 Petroleum Transmission Transmission Control
793F and 793F CMD Off-Highway Truck Braking System Oil Filter (Brake)
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies DC Bus Capacitor - Replace
C280-12 Marine Engine Safety Messages
C280-12 Marine Engine Model View Illustrations
C280-12 Marine Engine Product Lifting
2013/10/17 New Engine Monitoring System III Software Is Used on Certain 3500 Generator Set Engines {1901, 1920}
G3306B Petroleum Generator Set Engines Electronic Control Module (ECM)
G3306B Petroleum Generator Set Engines Diagnostic Trouble Codes
G3306B Petroleum Generator Set Engines Air/Fuel Ratio Control - Adjust
2013/10/24 New Engine Software Is Used on Certain G3512E Engines {1920}
G3306B Petroleum Generator Set Engines Gas Pressure - Check and Adjust