UPS 750 Uninterruptible Power Supply Caterpillar


Abbreviations and Acronyms

Usage:

UPS 750 AD2

Table 1
Abbreviations and Acronyms  Definitions 
AC  Alternating current 
ACI  AC Interface PWA 
ARM  Armature 
Aux  Auxiliary 
AVR  Automatic Voltage Regulation 
BBT or BBRG TEMP  Bottom Bearing Temperature 
BCC  Bypass Cabinet Controller PWA 
BFC  Bottom Field Coil 
BR  Diode Bridge 
C or CAP  Capacitor 
CAF  Comm/Accel Fiber optic (PWA) 
CAL  Comm/Accel LED (PWA) 
CAN  Controller Area Network 
CB  Circuit Breaker 
CIO  Customer input/output Interface 
COM  Common 
CT  Current Transformer 
DC  Direct Current 
DCI  Direct Current Interface 
EMI  Electromagnetic Interference 
EMO  Emergency Module OFF 
EPO  Emergency Power OFF 
ESS  External Source Sync (PWA) 
Fuse 
FAN  Fan Controller (PWA) 
FCD  Field Coil Driver 
FPU  Flywheel Power Unit 
FWI  Flywheel Interface 
GSM  Generator Start Module 
HVI  High Voltage Interface (PWA) 
I/O  Input/Output 
IGBT  Insulated Gate Bipolar Transistor 
Contactor, Relay, or Circuit Breaker 
LED  Light Emitting Diode 
NaN  Not a Number 
NC  Normally Closed 
NEC  National Electrical Code 
NEMA  National Electrical Manufacturers Association 
NO  Normally Open 
PCC  Parallel Cabinet Controller PWA 
PCI  Parallel Cabinet Interface PWA 
PDAC  Power Distribution for AC Voltage 
PS  Power Supply 
PWA  Printed Wire Assembly 
PWD  Power Distribution 
PWR  Power 
Resistor 
REPO  Remote Emergency Power Off 
RPS  Rotor Position Sensor 
SCR  Silicon Controlled Rectifier 
SDAT  Serial Data 
SELV  Safety Extra Low Voltage 
SIO  System Input/Output 
SW  Switch 
Transformer 
TB  Terminal Board 
TBT or TBRG TEMP  Top Bearing Temperature 
TFC  Top Field Coil 
UPS  Uninterruptible Power Supply 
VAC  Voltage Alternating Current 
VDC  Voltage Direct Current 

Caterpillar Information System:

C15 Petroleum Engine Gauges and Indicators
C8.7 Marine Engine Emissions Certification Film
C11 and C13 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Supply - Test
C8.7 Marine Engine Engine Starting
C8.7 Marine Engine Plate Locations and Film Locations
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Temperature Is High
C8.7 Marine Engine Safety Messages
2013/10/03 New Software for the Turbocharger Protection Strategy on C7.1 Engines {1052, 1901, 1920}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
C8.7 Marine Engine Exhaust Piping - Check
C15 Petroleum Engine Monitoring System
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705} Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
C15 Petroleum Engine Refill Capacities
C15 Petroleum Engine Fluid Recommendations
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108} CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
C8.7 Marine Engine Product Storage
C8.7 Marine Engine Engine Electronics
C15 Petroleum Engine Coolant Sample (Level 1) - Obtain
C280-08 Marine Engine Maintenance Interval Schedule
C13 and C15 Generator Sets Electronic Modular Control Panel 4 (EMCP 4)
2013/11/13 New Terminal Block Labels for the AC/DC Control Boxes and Wall Mount Panels on Global Design Generator {1408, 4490, 7451}
C280-08 Marine Engine Model View Illustrations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.