Rotor Drive (Planetary) Oil Level - Check
Note: The rotor drive (planetary) oil level plug is located on the left side of the machine, on the rotor drum frame.
Show/hide table
 | |
| Illustration 1 | g03438597 |
- Manually turn the rotor drum so that the level plug (1) is aligned with the hole (2) .
- Remove the level plug (1) .
- Maintain the oil level at the bottom of the opening for the plug (1) .
- Install the level plug (1) .
Caterpillar Information System:
PM-200 Cold Planer Rotor Drive (Planetary) Oil - Change
PM-200 Cold Planer Rotor Drive (Planetary) - Inspect
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
PM-200 Cold Planer Rotor Drive Brakes - Inspect/Adjust
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
PM310, PM312, and PM313 Cold Planer Rotor Coolant Level - Check
PM-200 Cold Planer Radiator - Clean
990K Wheel Loader and 844K Wheel Dozer Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Sample - Obtain
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Level - Check
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain
PM-200 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
PM-200 Cold Planer Rotor Service Door Pivot Pins - Lubricate
PM-200 Cold Planer Upper Conveyor Belt (Second Stage) Tension and Tracking - Adjust
2013/10/02 Improvements for Products and Systems Connected to Product Link {7606}
988K XE Wheel Loader Machine Systems Hydraulic Tank - Disassemble
988K XE Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
988K XE Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Assemble
2013/10/10 A New Plate Assembly is Now Used in the Air Starting Arrangements (If Equipped) on the 793F, and 797F Off-Highway Trucks {5500, 5501, 7516, 7540}
2013/10/03 The Hydraulic System Has Been Updated on the 797F Off-Highway Trucks {1408, 1439, 430S}
793F Series AC, 795F Series AC and 795F Series AC XQ Off-Highway Trucks VIMS 3G, Monitoring, and Truck Payload Measurement System (TPMS) Payload Monitor (Scoreboard)
794 AC Off-Highway Truck Daily Inspection