Rotor Drive Brakes - Inspect/Adjust
- Inspect the pad wear. The position of pin (1) will indicate the approximate pad wear. When pin (1) is 3 mm (0.118 inch) above surface (2), replace the pads.
Show/hide table
 | |
| Illustration 1 | g03438398 |
Caterpillar Information System:
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
PM310, PM312, and PM313 Cold Planer Rotor Coolant Level - Check
PM-200 Cold Planer Radiator - Clean
990K Wheel Loader and 844K Wheel Dozer Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Sample - Obtain
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Level - Check
PM-200 Cold Planer Power Take-Off Clutch Oil Filter - Replace
PM-200 Cold Planer Power Take-Off Clutch Oil Breather - Clean
PM-200 Cold Planer Power Take-Off Clutch Oil - Change
PM-200 Cold Planer Hydraulic System Return Filter - Replace
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
PM-200 Cold Planer Rotor Drive (Planetary) - Inspect
PM-200 Cold Planer Rotor Drive (Planetary) Oil - Change
PM-200 Cold Planer Rotor Drive (Planetary) Oil Level - Check
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain
PM-200 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
PM-200 Cold Planer Rotor Service Door Pivot Pins - Lubricate
PM-200 Cold Planer Upper Conveyor Belt (Second Stage) Tension and Tracking - Adjust
2013/10/02 Improvements for Products and Systems Connected to Product Link {7606}
988K XE Wheel Loader Machine Systems Hydraulic Tank - Disassemble
988K XE Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
988K XE Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Assemble