Electrohydraulic Control (Joystick) - Remove and Install
- Remove pads (1).
Show/hide table
Illustration 2 g03438498 - Remove knobs (2) and pads (3).
Show/hide table
Illustration 3 g03438537 - Remove covers (4).
Show/hide table
Illustration 4 g03438581 - Remove cover (5).
Show/hide table
Illustration 5 g03438618 - Disconnect harness assemblies (6).
Show/hide table
Illustration 6 g03438636 - Remove bolts (7) and electrohydraulic control (8).
Show/hide table
Illustration 1 | g03438086 |
- Install electrohydraulic control (8) in the reverse order of removal.
Caterpillar Information System:
PM-200 Cold Planer Power Take-Off Clutch Oil Sample - Obtain
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Level - Check
PM-200 Cold Planer Power Take-Off Clutch Oil Filter - Replace
PM-200 Cold Planer Power Take-Off Clutch Oil Breather - Clean
PM-200 Cold Planer Power Take-Off Clutch Oil - Change
PM-200 Cold Planer Hydraulic System Return Filter - Replace
PM-200 Cold Planer Lower Conveyor Deflectors (First Stage) - Inspect/Replace
PM-200 Cold Planer Lower Conveyor Belt (First Stage) Tension and Tracking - Adjust
PM-200 Cold Planer Legs (Struts) - Lubricate
Procedure to Install Gussets on the Front Axle Assembly on Certain 16M Motor Graders{0679, 4313, 5225} Procedure to Install Gussets on the Front Axle Assembly on Certain 16M Motor Graders{0679, 4313, 5225}
773E and 777D Off-Highway Truck/Tractor Object Detection System (Two Cameras) Diagnostic Capabilities
PM-200 Cold Planer Radiator - Clean
PM310, PM312, and PM313 Cold Planer Rotor Coolant Level - Check
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
PM-200 Cold Planer Rotor Drive Brakes - Inspect/Adjust
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
PM-200 Cold Planer Rotor Drive (Planetary) - Inspect
PM-200 Cold Planer Rotor Drive (Planetary) Oil - Change
PM-200 Cold Planer Rotor Drive (Planetary) Oil Level - Check
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain
PM-200 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
PM-200 Cold Planer Rotor Service Door Pivot Pins - Lubricate