794 AC Off-Highway Truck Caterpillar

Frame and Body - Inspect

Usage:

Note: The graphics that are shown are for illustrative purposes. This procedure is an in-chassis inspection.

Show/hide table

When it is necessary to work under the machine with the body (bed) raised, attach the body (bed) retaining cables to the rear tow points. Install the rear tow point pins through the ends of the retaining cables.

Failure to properly secure the body (bed) may result in personal injury or death.

Note: In order to access the body and areas of the frame, it may be necessary to use a portable access system (ladder, stair assembly, man lift, or other portable access system) that is suitable and compliant to local regulations.

Secure the dump body in the fully raised position and prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
Show/hide table

Illustration 1 g03421060
Inspect all tie off locations and bracket assemblies before each use. If significant/visible damage or deformation should occur to the bracket, stop use and replace as soon as possible.
Clean the frame and the body. Inspect the dump body. If the frame is damaged or worn, consult your Cat dealer for repair procedures.
Clean the dump body with a wire brush or a scraper. Inspect the dump body. If the dump body is damaged or worn, consult your Cat dealer for repair procedures.