XQC1600 Power Module Caterpillar


Sound Information

Usage:

XQC1600 ME2
Note: Information of the sound level is for machines in European Union countries and in countries that adopt the directives of the European Union.


NOTICE

Hearing protection may be needed when working near an operating generator set.


Sound levels will vary depending on the configuration of the generator set and the final installation of the generator set.

Refer to the following for sound levels:

  • The sound pressure level of a complete generator set (including the radiator) at 1 meter is 92 dB(A) for the noisiest configuration when "ISO 8528-10:1998(E) clause 14" is used at 75 percent of the rated power.

  • The sound power level of a complete generator set (including the radiator) is 116 dB(A) for the noisiest configuration when "ISO 8528-10:1998(E) clause 13" is used at 75 per cent of the rated power.

Note: The preceding sound levels are emission levels. The preceding sound levels are not necessarily safe sound levels. There is a correlation between the emission levels and the level of exposure. The correlation between emission levels and the level of exposure cannot be used to determine if further precautions are required.

Refer to the following for factors that influence the level of exposure:

  • The characteristics of the area around the generator set

  • Other sources of noise

  • The number of machines and other adjacent processes

  • The length of time of exposure to the noise

This information will enable the user of the machine to evaluate the hazard and the risk.

Caterpillar Information System:

UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modbus Register Map
XQC1600 Power Module Product Description
PM620 and PM622 Cold Planer Slope Operation
2013/08/19 New Software Is Now Available For All Cat® Products With PL522 China System {7606, 7620}
C175-16 Locomotive Engine Flywheel Housing Cover
C4.4 Industrial Engine Sensors and Electrical Components
C4.4 Industrial Engine Monitoring System - Engine Indicators and Aftertreatment Indicators
Procedure for Installing Capacitor Assembly on Certain UPS{4480} Procedure for Installing Capacitor Assembly on Certain UPS{4480}
2014/05/20 Low Engine Oil Pressure Issues, Oil Pump Failures for C9 and C9.3 Commercial Engines {1304, 1315}
794 AC Off-Highway Truck Air Conditioner Filter - Clean
C4.4 Industrial Engine Gauges and Indicators
C3.4B Industrial Engine Selective Catalytic Reduction Warning System
794 AC Off-Highway Truck Automatic Lubrication Reservoir - Fill
794 AC Off-Highway Truck Cab Air Filter - Clean/Replace
794 AC Off-Highway Truck Engine Air Precleaner - Clean
794 AC Off-Highway Truck Frame and Body - Inspect
794 AC Off-Highway Truck Frame and Body Support Pads - Clean/Inspect
C175-16 Locomotive Engine Exhaust Diffuser Adapter
C175-16 Locomotive Engine Flywheel
349F and 352F Excavator Machine System Wiring Harness (Open Circuit) - Test
349F and 352F Excavator Machine System Wiring Harness (Short Circuit) - Test
C15 and C18 Engines for China On-Highway Phase IV Event Codes
C4.4 Industrial Engine Diagnostic Flash Code Retrieval
349F and 352F Excavators Parking
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.