Model View Illustrations
The illustration shows typical exterior features of a 3516CHD Power Module.
Show/hide table
Illustration 1 | g03419562 |
(1) Air inlets
(2) Sight gauges (3) Left side separate circuit aftercooler (SCAC) Coolant filler access door (4) Entrance doors (5) Fuel supply connection (6) Operator control access door (7) Customer control wire entrance (8) Air cleaner access door (9) Emergency stop button |
The illustrations show typical interior features of a 3516CHD Power Module.
Show/hide table
Illustration 2 | g03428378 |
(9) Fuel filler
(10) Muffler (11) Lights (12) 3500CHD Engine (13) Right side SCAC coolant filler cap (14) Radiator fan (15) Right side jacket water heater filler cap (16) Fuel cooler (17) Lube oil makeup tank (18) Load cable access door (19) Light timer switch (20) Fuel/water separators (21) Fuel tank |
Show/hide table
Illustration 3 | g03430630 |
(22) Left side jacket water heater filler cap
(23) Jacket water heater (24) Battery charger (25) Exhaust stack (26) Fuel inlet strainer (27) Control panel (28) Battery disconnect switch (29) Batteries |
Show/hide table
Illustration 4 | g03427683 |
(30) Fuel tank and muffler access doors
(31) Generator (32) Air cleaners (33) Fans (34) Radiator access doors (35) Fuel tank |
The following illustration shows the dimensions of the power module.
Show/hide table
Illustration 5 | g03425525 |
Dimensions of the power module (W) (L) (H) |
Caterpillar Information System:
C13 Generator Set Engine Radiator and Aftercooler - Remove and Install
2013/08/15 New Long Blocks Are Available For Certain G3300 Engines {1000}
Air Conditioning and Heating R134a for All Caterpillar Machines Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
2013/09/02 A New Bolt and Washer that Improves Durability of the Idler Transfer Gear is Used on Certain TH48-E70 Petroleum Transmissions {1234}
3500 Engines Engine Oil Cooler - Install
3500 Engines Engine Oil Cooler - Remove
C4.4 Industrial Engine Emissions Certification Film
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Piston Pump (Water Delivery) - Remove and Install
Site Positioning Requirements for Cat® MineStar System Products {7605} Site Positioning Requirements for Cat® MineStar System Products {7605}
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Combined Function - Electric Control
CAT WDS OEM and 777F Off-Highway Truck/Tractor Water Delivery System Gear Pump (Charge) - Remove and Install
C4.4 Industrial Engine Alarms and Shutoffs
Product LinkTM PL421 Installation Quick Reference Guide{7606} Product LinkTM PL421 Installation Quick Reference Guide{7606}
C3.4B Industrial Engine Selective Catalytic Reduction Warning System
C4.4 Industrial Engine Gauges and Indicators
794 AC Off-Highway Truck Air Conditioner Filter - Clean
2014/05/20 Low Engine Oil Pressure Issues, Oil Pump Failures for C9 and C9.3 Commercial Engines {1304, 1315}
Procedure for Installing Capacitor Assembly on Certain UPS{4480} Procedure for Installing Capacitor Assembly on Certain UPS{4480}
C4.4 Industrial Engine Monitoring System - Engine Indicators and Aftertreatment Indicators
C4.4 Industrial Engine Sensors and Electrical Components
C175-16 Locomotive Engine Flywheel Housing Cover
2013/08/19 New Software Is Now Available For All Cat® Products With PL522 China System {7606, 7620}
PM620 and PM622 Cold Planer Slope Operation