3500 Engines Caterpillar


Turbocharger - Install

Usage:

3516C 9F4

安装步骤



    图 1g03409547

  1. 将适当起吊设备连在涡轮增压器 (12) 上。 涡轮增压器 (12) 的重量约为 37 kg (80 lb)

  2. 将涡轮增压器 (12)、螺栓 (11) 和垫片安装到排气歧管上。

  3. 安装螺栓 (13)。


    图 2g03409207

  4. 安装螺栓 (9) 和螺栓 (10)。


    图 3g03409030

  5. 安装螺栓 (6)、螺栓 (7) 和卡箍 (8)。


    图 4g03408980

  6. 连接管组件 (4),然后安装螺栓 (5)。


    图 5g03408940

  7. 安装卡箍 (1)。 拧紧卡箍 (1) 至扭矩 20 ± 1 N·m (177 ± 9 lb in)。 轻敲卡箍 (1) 四周,并重新拧紧至扭矩 20 ± 1 N·m (177 ± 9 lb in)

  8. 连接软管组件 (2)。

  9. 安装管组件 (3) 和 O 形密封圈。

Caterpillar Information System:

3500 Engines Turbocharger - Remove
C13 Generator Set Engine Exhaust Manifold - Remove and Install
C7.1 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
349F and 352F Excavators Leaving the Machine
C15 and C18 Engines for China On-Highway Phase IV Diagnostic Capabilities
2013/09/20 A New and Improved Switch and Contactor Are Used for the Jacket Water Heater Control on Certain 3512C Engines {1383, 1408, 1408}
C7.1 Industrial Engine Diesel Exhaust Fluid - Fill
2013/09/16 New Wiring Harness Film Is Used for the Pre-lubrication Pump on Certain G3500 Engines {1319, 1408}
3500 Engines Engine Oil Cooler - Assemble
3500 Engines Engine Oil Cooler - Disassemble
2013/08/15 New Software For Cat® ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/06 New Engine Oil Filter for C3.4B Engines {1308}
C13 Generator Set Engine Water Pump - Remove and Install
C13 Generator Set Engine Water Temperature Regulator - Remove and Install
2013/12/19 A New Pre-Lube System Is Used On Certain 3508 Industrial Engines Used In Fire Pump Applications {1307, 1319}
2013/11/08 New V Band Clamps and Mounting Hardware Are Used on Certain 3512C Engines {1059, 1071, 7553}
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Solenoid Valves
CAT WDS OEM and 777F Off-Highway Truck/Tractor Water Delivery System Gear Pump (Charge) - Remove and Install
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Combined Function - Electric Control
Site Positioning Requirements for Cat® MineStar System Products {7605} Site Positioning Requirements for Cat® MineStar System Products {7605}
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Piston Pump (Water Delivery) - Remove and Install
C4.4 Industrial Engine Emissions Certification Film
3500 Engines Engine Oil Cooler - Remove
3500 Engines Engine Oil Cooler - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.