New Wiring Harness Film Is Used for the Pre-lubrication Pump on Certain G3500 Engines {1319, 1408}
- Engine:
- G3512E (S/N: SSR162,165,172,178-180,183-186,197-199,201-202,205-206,209-210,212-213,215-UP; NGS135,137,139-141,143-144,154,159-UP)
- G3516C (S/N: GSB124-UP; GZC223,225,228,236-237,239-244,253-256,258-UP; F6D103-106,108-UP; F6E1-UP; F6F1-UP; GZZ339-346,348-UP)
- G3516E (S/N: F6G1-UP; GAS270-UP)
- G3516H (S/N: GLM1-UP)
- G3520C (S/N: GZA218-221,227-237,243-UP; GZB235-UP; GZJ474-475,477-484,487,491-506,515-518,521-524,527-530,532,534-541,543-553,600-611,614,619-620,624-630,632-637,640-651,656-UP; GZL146-UP; GZM211-212,214-UP; GZN792-806,808-817,820-821,825-853,856,858-UP; RLP240-UP; LGS163-UP)
- G3520E (S/N: GZE116-117,119-126,128-129,132-139,154-163,169,178-183,188-194,202,205,213-226,228-UP; GZH160-UP)
Description of Change: The new diagram has been corrected to reflect the correct numbering in the diagram for wiring.
Adaptable To:
Show/hide table
Illustration 1 | g03418069 |
438-5384 Film |
The new 438-5384 Film replaces the previous 349-0995 Film for the following pre-lubrication pumps :
- 349-8531 Prelubrication Oil Pump Gp
- 366-5476 Prelubrication Oil Pump Gp
- 387-9523 Prelubrication Oil Pump and Mounting Gp
Show/hide table
Effective Serial Numbers     |
---|
S/N:NGS00160-UP     |
S/N:SSR00216-UP     |
S/N:GG300102-UP     |
S/N:F6D00109-UP     |
S/N:F6E00002-UP     |
S/N:F6F00108-UP     |
S/N:GSB00125-UP     |
S/N:GZC00260-UP     |
S/N:GZZ00363-UP     |
S/N:F6G00103-UP     |
S/N:GAS00281-UP     |
S/N:GLM00118-UP     |
S/N:GZA00259-UP     |
S/N:GZB00250-UP     |
S/N:GZJ00662-UP     |
S/N:GZL00147-UP     |
S/N:GZM00215-UP     |
S/N:GZN00881-UP     |
S/N:LGS00179-UP     |
S/N:RLP00262-UP     |
S/N:GZE00237-UP     |
S/N:GZH00163-UP     |
Caterpillar Information System:
3500 Engines Engine Oil Cooler - Assemble
3500 Engines Engine Oil Cooler - Disassemble
2013/08/15 New Software For Cat® ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/06 New Engine Oil Filter for C3.4B Engines {1308}
C4.4 Engines Diesel Oxidation Catalyst Has Low Conversion Efficiency
C7.1 Engines Camshaft Position Sensor - Remove and Install
C7.1 Engines Diesel Oxidation Catalyst Has Incorrect Inlet Temperature
3516C Petroleum Engines Hydraulic Starting Motor - Remove and Install
C4.4 Industrial Engine Battery Disconnect Switch
2014/03/14 A New Wiring Harness Is Used in the Dosing Cabinets of Certain 3516C and C175-16 Engines {108H, 1091, 1408}
C15 Petroleum Engines Maintenance Interval Schedule
794 AC Off-Highway Truck Coolant Pressure Cap - Clean/Replace
C7.1 Industrial Engine Diesel Exhaust Fluid - Fill
2013/09/20 A New and Improved Switch and Contactor Are Used for the Jacket Water Heater Control on Certain 3512C Engines {1383, 1408, 1408}
C15 and C18 Engines for China On-Highway Phase IV Diagnostic Capabilities
349F and 352F Excavators Leaving the Machine
C7.1 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
C13 Generator Set Engine Exhaust Manifold - Remove and Install
3500 Engines Turbocharger - Remove
3500 Engines Turbocharger - Install
C13 Generator Set Engine Water Pump - Remove and Install
C13 Generator Set Engine Water Temperature Regulator - Remove and Install
2013/12/19 A New Pre-Lube System Is Used On Certain 3508 Industrial Engines Used In Fire Pump Applications {1307, 1319}
2013/11/08 New V Band Clamps and Mounting Hardware Are Used on Certain 3512C Engines {1059, 1071, 7553}