A New Elbow Is Used on Certain 3500 Engines {1371}
- Engine:
- 3512C (S/N: T3R1-UP; T3S1-UP; T3W1-UP)
- 3516C (S/N: TKS1-UP; TKY1-UP)
Description of Change: The new elbow allows for improved flow in the sea water cooling circuit, maintaining SCAC temperatures in the proper range.
Adaptable To: The 143-9208 Elbow replaces the 143-9207 Elbow and is adaptable back to first production on the serial numbers listed above. Illustration 1 shows the required gaskets that are used to install the new elbow.
Show/hide table
Illustration 1 | g03413740 |
(1) 5B-3265 Gasket (2) 143-9208 Elbow (3) 3P-6061 Gasket (4) 144-6074 Gasket |
The change is effective for the serial numbers listed in Table 1.
Show/hide table
Sales Model     | Effective Serial Numbers     |
3512C HD     | S/N:T3R00250-UP     |
S/N:T3S00202-UP | |
S/N:T3W00208-UP | |
3516C HD     | S/N:TKS00214-UP     |
S/N:TKY00208-UP |
Caterpillar Information System:
330F MHPU Mobile Hydraulic Power Unit Machine System Solenoid Valve (Proportional Reducing) - Calibrate - Boom Down Regeneration
3516C Locomotive Engines Selective Catalytic Reduction Relay - Test
C13 Generator Set Engine Alternator - Remove and Install
C7.1 Engines Diesel Particulate Filter Temperature Is Low
2013/08/15 Improved Camshafts Are Now Used on Certain C15 and C18 Engines {1210}
2015/05/29 Improved Camshafts Are Now Used on Certain C15 and C18 Machine Engines {1210}
2013/08/06 A New Upgraded Starter Is Used for Certain 3512, 3512B, 3512B HD, and 3512CEngines {1453}
3512C Petroleum Engines Engine Speed/Timing Sensor - Remove and Install
C13, C15, and C18 Generator Set Engines Piston and Rings
2013/08/06 Improved Clamps are Now Used for the Cooling Lines Group on Certain Excavators {1351}
3512C Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
2013/08/09 New Software Is Used on Certain 3500 Petroleum Engines {1901, 1920}
C13 Generator Set Engine Electronic Control Module - Remove and Install
C13 Generator Set Engine Electric Starting Motor - Remove and Install
349F and 352F Excavator Machine System Connector Locations
3512E Petroleum Engines Fuel Priming Pump - Remove and Install
C13 Generator Set Engine Vibration Damper and Pulley - Remove and Install
C13 Generator Set Engine Turbocharger - Remove and Install
C7.1 Industrial Engine Fan Clearance - Check
3512C Petroleum Engines Gas Shutoff Valve - Remove and Install - Dynamic Gas Blending
3512C Petroleum Engines Air Shutoff - Remove and Install
C13 Generator Set Engine Engine Support (Front) - Remove and Install
C7.1 Industrial Engine Fault Logging
3512C Petroleum Engines Engine Oil Cooler - Remove and Install