Housing (Front)
Show/hide table
| |
| Illustration 1 | g03409382 |
|
Typical example | |
Show/hide table
| Specification for 244-5683 Front Housing Gp, 257-3276 Front Housing Gp, 308-1791 Front Housing Gp, 433-7841 Front Housing Gp, and 345-8095 Front Housing Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 3E-8044 Stud | Before assembly, apply red Loctite 271 to the threads. |
| 2 | 8 | 5P-4255 Locking Bolt | Use the following procedure in order to tighten the bolts that fasten the plate to the cylinder block. |
| Tighten the eight locking bolts to |
|||
| Again, tighten the eight locking bolts to |
|||
Show/hide table
| |
| Illustration 2 | g03409379 |
|
Right side view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 3 | 1 | 166-9144 Gasket | During assembly, the rear face of the housing and the front face of the cylinder block must be free of oil, fuel, water, dirt, assembly compounds, and any other contaminants.
After assembly, trim the gasket and flush the gasket with the face of the housing. |
| 4 | 1 | 155-9524 Integral Seal | |
| 5 | - | - | Apply ultra blue Loctite 587 in order to fill the space at the connecting joint of the front plate, oil pan gasket, and cylinder block. |
Show/hide table
| |
| Illustration 3 | g03409383 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 6 | - | - | Tighten the 12 button head screws (6) only after tightening the two nuts (7).
Tighten the 12 button head screws to |
Caterpillar Information System:
349F and 352F Excavators Hydraulic System Counterweight (Removal and Installation Hydraulic System)
349F and 352F Excavators Machine System Return Hydraulic System
349F and 352F Excavators Hydraulic System Oil Makeup (Travel System)
349F and 352F Excavators Hydraulic System Travel Parking Brake
3512E Petroleum Engine Solenoid Valve - Test
349F and 352F Excavators Machine System Travel Motor
2013/08/05 New Alternator Guards are Used on Certain 3500 Engines {7174}
349F and 352F Excavators Machine System Solenoid Valve (Fine Swing) - If Equipped
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561} 226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
349F and 352F Excavators Hydraulic System Oil Makeup (Swing System)
349F and 352F Excavators Machine System Relief Valve (Swing)
349F and 352F Excavators Hydraulic System Swing Motor
2013/07/30 New Service Meter Kit Is Now Used on Certain 3306B Engines, and 3406C Generator Sets {7478}
390F MHPU Mobile Hydraulic Power Unit Fuel Transfer Pump (Refueling) - If Equipped
2013/12/20 New Turbocharger Groups Are Used on Certain 3500B Engines {1052}
349F and 352F Excavators Machine System Hydraulic Filter (Pilot)
349F and 352F Excavators Machine System Main Hydraulic Pump
3512E Petroleum Engine NOx Reduction System (NRS) - Test
349F and 352F Excavators Machine System Boom Drift Reduction Valve
349F and 352F Excavators Hydraulic System Stick Drift Reduction Valve
2013/08/05 New Alternator Guards are Used on Certain 3500 Engines {7174}
C15 and C18 Industrial Engines Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications
C15 and C18 Industrial Engines Turbocharger - Remove and Install
C15 and C18 Industrial Engines Turbocharger - Remove and Install - High Pressure, For Series Turbocharger Applications