C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Fuel Filter and Water Separator

Usage:

826K 2L3


图 1g03408136

表 1
213-4740 燃油注油泵和油水分离器的技术规格 
项目  数量  零件  技术规格说明 
212-9580 油水分离器和燃油滤清器总成  拧紧,直至落座,然后再拧紧 3/4 圈。 
343-5527 油杯  使用以下步骤:
1. 从滤清器总成的底部拆下盖。
2. 从盖的下面拆下密封件,然后弃置盖。
3. 用机油润滑密封件,然后将其重新安装到油杯组件的槽中。
4. 将油杯组件安装到滤清器总成底部的螺纹上。
5. 将油杯拧紧至扭矩为 10 N·m (89 lb in)。 

Caterpillar Information System:

C13 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
3512C Petroleum Engines Electronic Control Module (Engine) - Remove and Install
2014/01/17 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B Engines {1250, 1280}
2013/10/17 A New Expansion Tank Assembly Is Used on Certain 3500 Marine Engines {1354}
C7.1 Industrial Engine Manifold (DEF Heater) - Remove and Install
C7.1 Industrial Engine Solenoid Valve (DEF Heater Coolant) - Remove and Install
3516C Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
3512E HD Petroleum Engine Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped
3512C Oil Well Service Engines Declaration of Conformity
435-8503 Major Engine Overhaul Foundational Kit for 3406E Marine Engines{1000} 435-8503 Major Engine Overhaul Foundational Kit for 3406E Marine Engines{1000}
3516C Petroleum Engines Engine Speed/Timing Sensor - Remove and Install
Installation of the 384-9286 Protection Cover Gp for Certain Clean Emissions Module Arrangements{108D, 795C} Installation of the 384-9286 Protection Cover Gp for Certain Clean Emissions Module Arrangements{108D, 795C}
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Disassemble
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Assemble
2013/11/21 A New Jacket Water Outlet Elbow Is Used on Certain C175 Marine and Petroleum Engines {1380}
3512C Petroleum Engines Gas Pressure Regulator - Remove and Install
C7.1 Engines NOx Conversion Is Low
3512C Petroleum Engines Fuel Control Actuator - Remove and Install - Dynamic Gas Blending
C32 Auxiliary Engine Engine Electronics
2013/07/25 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3500B and 3500C Engines {1379}
2013/07/25 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
349F and 352F Excavators Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
349F and 352F Excavators Hydraulic System Relief Valve (Main) - Heavy Lift
349F and 352F Excavators Machine System Control Valve (Boom Lowering)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.