A New Expansion Tank Assembly Is Used on Certain 3500 Marine Engines {1354}
- Engine:
- 3508C (S/N: TTA1-UP; TTB1-UP)
- Petroleum Engine:
- 3512C (S/N: LLB1-UP)
- 3512C (S/N: TTC1-UP; TTE1-UP; TTF1-UP; TTG1-UP; SLM1-UP; TKP1-UP; T3P1-UP; T3R1-UP; T3S1-UP; E3W1-UP; T3W1-UP; E3X1-UP; E3Y1-UP)
- 3516B (S/N: S2R1-UP)
- 3516C (S/N: TTD1-UP; TTH1-UP; TTJ1-UP; TKR1-UP; JTS1-UP; TKS1-UP; TKT1-UP; TKX1-UP; TKY1-UP; E3Z1-UP)
- 3516C (S/N: PES1-UP)
Description of Change: The new expansion tank assembly is designed stronger and more resistant to fatigue.
Adaptable To: The 439-8489 Expansion Tank As replaces the former 293-3399 Expansion Tank As on the engines that are listed above.
The 293-3399 Expansion Tank As is canceled.
The 439-8489 Expansion Tank As is adaptable to the above engines back to first production. Effectivity is listed in Table 1.
Show/hide table
| Effectivity |
| S/N:TTA00276-UP |
| S/N:TTB00557-UP |
| S/N:E3W00355-UP |
| S/N:E3X00279-UP |
| S/N:E3Y00374-UP |
| S/N:LLB00150-UP |
| S/N:SLM00520-UP |
| S/N:TTC00613-UP |
| S/N:TTE00211-UP |
| S/N:TTF00567-UP |
| S/N:TTG00341-UP |
| S/N:T3P00224-UP |
| S/N:T3R00263-UP |
| S/N:T3S00208-UP |
| S/N:T3W00215-UP |
| S/N:TKP00232-UP |
| S/N:S2R00799-UP |
| S/N:E3Z00206-UP |
| S/N:JTS00444-UP |
| S/N:PES00893-UP |
| S/N:TTD00415-UP |
| S/N:TTH00773-UP |
| S/N:TTJ00494-UP |
| S/N:TKR00206-UP |
| S/N:TKS00220-UP |
| S/N:TKT00224-UP |
| S/N:TKX00202-UP |
| S/N:TKY00271-UP |
Caterpillar Information System:
C7.1 Industrial Engine Manifold (DEF Heater) - Remove and Install
C7.1 Industrial Engine Solenoid Valve (DEF Heater Coolant) - Remove and Install
3516C Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
3512E HD Petroleum Engine Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped
3512C Oil Well Service Engines Declaration of Conformity
435-8503 Major Engine Overhaul Foundational Kit for 3406E Marine Engines{1000} 435-8503 Major Engine Overhaul Foundational Kit for 3406E Marine Engines{1000}
3516C Petroleum Engines Engine Speed/Timing Sensor - Remove and Install
Installation of the 384-9286 Protection Cover Gp for Certain Clean Emissions Module Arrangements{108D, 795C} Installation of the 384-9286 Protection Cover Gp for Certain Clean Emissions Module Arrangements{108D, 795C}
3512E Engines for Well Stimulation Pumps Cover Group (Front Housing)
3516C Petroleum Engines Flywheel
C15 Petroleum Generator Set Engines Belt Tightener
3516C Petroleum Engines Flywheel Housing Cover
2014/01/17 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B Engines {1250, 1280}
3512C Petroleum Engines Electronic Control Module (Engine) - Remove and Install
C13 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Disassemble
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Assemble
2013/11/21 A New Jacket Water Outlet Elbow Is Used on Certain C175 Marine and Petroleum Engines {1380}
3512C Petroleum Engines Gas Pressure Regulator - Remove and Install
C7.1 Engines NOx Conversion Is Low
3512C Petroleum Engines Fuel Control Actuator - Remove and Install - Dynamic Gas Blending
C32 Auxiliary Engine Engine Electronics
2013/07/25 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3500B and 3500C Engines {1379}