Wiring Harness (Open Circuit) - Test
断路是指导致电流不流动的电路故障。 断路可能是由电路内导线断开导致。 大多数情况下，断路都是由连接不良引起。 断路也可能是由电路中使用的某个电气接头中存在连接故障导致。
以下步骤是一种检查电路中有无断路或连接不良的方法。
测试有无断路
Show/hide table
| 故障排除测试步骤 | 数值 | 结果 |
|---|---|---|
| 1. 确定断路 A. 确定可疑电路中的接头和导线编号。 使用机器的电气系统示意图检查电路。 B. 将钥匙起动开关和断路开关转至断开位置。 C. 从配线线束上断开部件和 ECM。 D. 在一个断开的线束连接上，将一根跨接导线连在可疑导线的触点与机架接地之间。 E. 在机器线束的其他接头上，使用万用表表笔测量电阻。 测量可疑导线触点与机架接地之间的电阻。 |
电阻小于 5 Ω。 |
正常：线束电路正常。 停止 不正常：电阻大于 5K Ω。 机器线束中存在断路。 修理：修理或更换机器线束。 注：电阻大于 5 Ω 但小于 5kΩ 表示电路中的连接松动或腐蚀。 电阻测量值大于 5KΩ 表示电路中存在断路。 停止 |
Caterpillar Information System:
Interference May Occur Between the Clips of Air Cleaner Group, the Hose Assembly of Steering Lines Group, and the Hose of Air Lines Group on 777G Off-Highway Trucks{1051, 1054, 1071, 4304} Interference May Occur Between the Clips of Air Cleaner Group, the Hose Assembly of Steering Lines Group, and the Hose of Air Lines Group on 777G Off-Highway Trucks{1051, 1054, 1071, 4304}
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Air Conditioner Lines
MH3059 Material Handler Machine Systems Piston Pump (Main Hydraulic) - Remove and Install - Right
Installing the 388-8265 Work Tool Electrical Harness {1408} Installing the 388-8265 Work Tool Electrical Harness {1408}
Cat® Detect and Cat® MineStar System Onboard Configuration for the MS352 Satellite Receiver Firmware Menu
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Brake Accumulator
Installing the 422-3362 Work Tool Wiring (Self Level) Kit {1408} Installing the 422-3362 Work Tool Wiring (Self Level) Kit {1408}
986H Wheel Loader Machine Systems Brake Accumulator - Charged
Installing the 388-8286 Bluetooth Radio Kit {7338} Installing the 388-8286 Bluetooth Radio Kit {7338}
SS-56 Felling Head Grapple Arm - Remove and Install
793F WTR OEM Off-Highway Truck Power Train Final Drive, Brake and Wheel - If Equipped
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Operation
Installing the 388-8273 Work Tool Electrical Harness with Left Hand Joystick {1408} Installing the 388-8273 Work Tool Electrical Harness with Left Hand Joystick {1408}
259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Steer Loaders General Information - Standard Flow
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Cleaner Bar
Cat® Detect and Cat® MineStar System Onboard Configuration for the MS352 Satellite Receiver Help Menu
2013/10/21 New Slack Adjuster Group is Used on the 777G Off-Highway Trucks {4257, 4261}
2014/03/04 A New Special Instruction Is Available to Install 442-4755 Fuel Tank and Mounting Gp on Certain Vibratory Soil Compactors {1273}
Installing the 388-8275 Cab Side Window Kit {7310} Installing the 388-8275 Cab Side Window Kit {7310}
259D, 279D and 289D Compact Track Loaders, 257D, 277D and 287D Multi Terrain Loaders and 236D, 242D, 246D and 262D Skid Steer Loaders Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
Installation Procedure for the 388-8276 Cab Door and Mounting Kit (GLASS) on All D Series Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7308} Installation Procedure for the 388-8276 Cab Door and Mounting Kit (GLASS) on All D Series Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7308}
SS-56 Felling Head Hydraulic Cylinder (Accumulator Arm) - Remove and Install
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Bogie and Idler - Inspect/Replace
834K Wheel Dozer and 836K Landfill Compactor Machine Systems Lift and Tilt Cylinder Drift - Check