Nitrogen Oxide Sensor - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | - | Loctite 镍基防咬合剂 | - |
Show/hide table
高温发动机部件可能导致灼伤。 进行发动机保养之前让发动机和部件冷却下来。 |
- 断开导线线束组件 (2)。 拆下电缆扎带 (1),然后拆下氮氧化物传感器 (3)。
Show/hide table
图 1 | g03394810 |
典型示例 |
注: 新的氮氧化物传感器经过预润滑。 不要在新的氮氧化物传感器上使用工具 (A)。 当安装现有氮氧化物传感器时,仅在螺纹上安装工具 (A)。
注: 有关氮氧化物传感器的更多信息,请参阅专门说明书, REHS8151, "氮氧化物传感器处理和安装步骤"
- 按与拆卸相反的顺序安装氮氧化物传感器 (3)。
- 将氮氧化物传感器 (3) 拧紧至扭矩为
50 ± 10 N·m (37 ± 7 lb ft) 。
- 将氮氧化物传感器 (3) 拧紧至扭矩为
Caterpillar Information System:
2013/07/08 New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202} 424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202}
374F Excavator Monitoring System
3500 Generator Sets Product Description
C15 and C18 Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
C32 Generator Set Fuel Related Components in Cold Weather
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Voltage Control (Load Protection) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Manifold (DEF Heater) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
3516C Petroleum Engines Engine Oil Cooler - Remove and Install
C175-16 Engine for 795F Series AC Off-Highway Trucks Fuel Injection Pump
794 AC Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
794 AC Off-Highway Truck Window Wiper - Inspect/Replace
794 AC Off-Highway Truck Windows - Clean
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install - Remote Mounted
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install - With Remote Mounted Oil Filter Base
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - Power Take Off equipped
2013/06/18 Proper Pinout Locations on Certain Atlas Copco Industrial 3512C Engines {1408}
C4.4 Industrial Engine Safety Messages
3512C Oil Well Service Engines Starting the Engine