Diesel Exhaust Fluid Filter - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 443-0955 | DEF 滤清器拆卸工具 | 1 |
Show/hide table
 |
不正确处理化学用品会导致个人受伤。 确保您使用了本作业要求的必需防护用品。 确保阅读并理解所使用的任何化学用品的标签和材料安全数据表上所述的所有说明和危险。 遵循化学用品制造商建议的有关化学用品搬运、储存和废弃的所有安全注意事项。 |
Show/hide table
| 注意 |
|---|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 拆下盖 (1) 。
Show/hide table
 | |
| 图 1 | g03373816 |
- 拆下扩展设备 (2) 。
Show/hide table
 | |
| 图 2 | g03373819 |
Show/hide table
 | |
| 图 3 | g03373821 |
Show/hide table
 | |
| 图 4 | g03709361 |
仅供参考 | |
- 使用工具 (A) 拆下柴油机排气处理液滤清器 (3) 。
注: 拆卸时避免扭曲柴油机排气处理液滤清器。 扭曲可能会导致撕裂。
安装步骤
- 按与拆卸相反的顺序安装柴油机排气处理液滤清器 (3) 。
注: 安装时避免扭曲柴油机排气处理液滤清器。 扭曲可能会导致撕裂。
- 使用柴油机排气处理液或蒸馏水润滑柴油机排气处理液滤清器 (3) 的油封。
- 将盖 (1) 拧紧至扭矩为 20 ± 5 N·m (177 ± 44 lb in)。
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Module - Assemble
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Module - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Flange (Discharge) - Remove and Install
2013/06/18 A New Jumper Harness Is Now Installed on Certain C32 Marine Engine Harnesses {1408}
C7.1 Marine Generator Set Reference Material
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
2013/06/13 New Injection Assemblies Are Equipped with Flow Indicators for Certain Retrofit Selective Catalytic Reduction Systems {108I}
C175-16 Locomotive Engine Engine Oil Temperature Sensor
C32 Generator Set Voltage Regulators - R450T Automatic Voltage Regulator (AVR)
C7.1 Industrial Engine Product Storage
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Manifold (DEF Heater) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Voltage Control (Load Protection) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
C32 Generator Set Fuel Related Components in Cold Weather
C15 and C18 Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
3500 Generator Sets Product Description
374F Excavator Monitoring System
424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202} 424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202}
2013/07/08 New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}