Diesel Exhaust Fluid Module - Disassemble
拆解步骤
- 将柴油机排气处理液排入适当的容器以便保存或处理。
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 拆下夹子 (1) 和 (5) 。 断开线束组件 (2) 。 拆下软管组件 (4) 和软管 (3) 。
Show/hide table
图 1 | g03365452 |
注: 请参阅专门说明书, REHS8231, "柴油机排气处理液 (DEF) 接头的拆卸步骤",了解软管组件 (4) 的正确拆卸步骤。
- 拆下电缆带 (6) ,然后断开线束组件 (7) 。
Show/hide table
图 2 | g03365463 |
- 拆下螺栓 (8) 、板 (9) 、歧管 (10) 和垫片(未显示)。
Show/hide table
图 3 | g03365465 |
- 拆下螺栓 (11) 。
Show/hide table
图 4 | g03365468 |
- 拆下螺栓 (12) 。
Show/hide table
图 5 | g03365475 |
- 拆下螺栓 (13) 和泵组件 (14) 。
Show/hide table
图 6 | g03365477 |
- 将螺栓 (15) 和支架 (16) 从油箱上拆下。
Show/hide table
图 7 | g03365493 |
- 卸下螺栓 (18) 和盖 (17) 。 拆下螺栓 (19) 和歧管 (20) 。
Show/hide table
图 8 | g03365514 |
- 将 O 形密封圈 (23) 从盖 (21) 上拆下。 将螺塞 (24) 和 (25) 从歧管 (21) 上拆下。
Show/hide table
图 9 | g03365521 |
- 断开线束组件 (26) 并拆下电磁阀组件 (27) 。
Show/hide table
图 10 | g03365528 |
- 拆下继电器 (28) 。
Show/hide table
图 11 | g03365540 |
- 拆下螺栓 (29) 。 拆下控制模块 (30) 。
Show/hide table
图 12 | g03365547 |
- 断开线束组件 (33) 。 拆下电缆带 (32) 。 拆下电子控制装置 (31) 。
Show/hide table
图 13 | g03365554 |
- 拆下盖 (34) 。
Show/hide table
图 14 | g03383608 |
- 拆下扩展设备 (35) 。
Show/hide table
图 15 | g03383609 |
- 拆下滤清器 (36) 。
Show/hide table
图 16 | g03383610 |
- 拆下电缆扎带 (38) 、螺栓 (39) 和支架 (37) 。
Show/hide table
图 17 | g03366015 |
- 断开线束组件 (40) 。
Show/hide table
图 18 | g03366035 |
- 拆下螺栓 (41) 。 从泵 (43) 上分离支承组件 (42) 。
Show/hide table
图 19 | g03366046 |
- 拆下电缆扎带 (45) 和线束组件 (44) 。
Show/hide table
图 20 | g03366053 |
- 拆下接头 (46) 和 O 形密封圈。
Show/hide table
图 21 | g03366057 |
注: 在接头 (46) 上做识别标记,以便于安装。 接头 (46) 不可互换。
- 拆下支架 (47) 。 拆下软管组件 (48) 。
Show/hide table
图 22 | g03383611 |
- 拆下螺母 (52) 。 拆下扎带 (51) 。 将油箱 (48) 从支承组件 (50) 上拆下。
Show/hide table
图 23 | g03383612 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Flange (Discharge) - Remove and Install
2013/06/18 A New Jumper Harness Is Now Installed on Certain C32 Marine Engine Harnesses {1408}
C7.1 Marine Generator Set Reference Material
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
2013/06/13 New Injection Assemblies Are Equipped with Flow Indicators for Certain Retrofit Selective Catalytic Reduction Systems {108I}
C175-16 Locomotive Engine Engine Oil Temperature Sensor
C32 Generator Set Voltage Regulators - R450T Automatic Voltage Regulator (AVR)
C7.1 Industrial Engine Product Storage
C13, C15, and C18 Tier 4 Final Engines Coolant Level Sensor
C175-16 and C175-20 Engines for Off-Highway Trucks Connecting Rod Bearings
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Module - Assemble
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Filter - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Diesel Exhaust Fluid Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Manifold (DEF Heater) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Voltage Control (Load Protection) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
C32 Generator Set Fuel Related Components in Cold Weather
C15 and C18 Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
3500 Generator Sets Product Description
374F Excavator Monitoring System