Ripper Control Valve - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
Start By:
- Release the hydraulic system pressure.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove panel (1).
Show/hide table
Illustration 2 g03389765 - Cut the cable straps and disconnect harness assemblies (2). Disconnect hose assemblies (3).
Show/hide table
Illustration 3 g03389769 - Disconnect hose assemblies (4).
Show/hide table
Illustration 4 g03389965 - Remove clips (5).
Show/hide table
Illustration 5 g03389981 - Attach Tooling (A) and a suitable lifting device to ripper valve (6). The weight of ripper valve (6) is approximately
41 kg (90 lb) . Remove bolts (7) and bolts (8). Use Tooling (A) and the suitable lifting device in order to remove ripper valve (6).Show/hide table
Illustration 6 g03390077 - Remove plate (9) from ripper valve (6).
Show/hide table
| |
| Illustration 1 | g03389762 |
- Install ripper valve (6) in the reverse order of removal.
Caterpillar Information System:
D9T Track-Type Tractor Systems Hydraulic Fan Speed (On Demand) - Test and Adjust
988K XE Wheel Loader Electronic Control (Brake System)
988K XE Wheel Loader Monitoring System (Brake Functions)
Caterpillar Track Type Tractor (D9 - D11) Technician ChecklistTransmission and Bevel Gear Removal and Installation{0372, 0374, 3010, 3010, 3011, 3011, 3030, 3030, 3256, 3256, 3257, 3257, 3258, 3258} Caterpillar Track Type Tractor (D9 - D11) Technician ChecklistTransmission and Bevel Gear Removal and Installation{0372, 0374, 3010, 3010, 3011, 3011, 3030, 3030, 3256, 3256, 3257, 3257, 3258, 3258}
Caterpillar Track Type Tractor (D9 - D11) Technician ChecklistTorque Converter (TC) Removal and Installation{0372, 0374, 3101, 3101} Caterpillar Track Type Tractor (D9 - D11) Technician ChecklistTorque Converter (TC) Removal and Installation{0372, 0374, 3101, 3101}
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Remove and Install - High Flow
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pump Control Valve (Implement)
C9.3 Engines for Caterpillar Built Machines Inlet Module (Catalyst) - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
374F Excavator Machine Systems Relief Valve (Main) - Test and Adjust
Caterpillar Track Type Tractor (D9 - D11) Technician ChecklistFinal Drive, Steering Clutch, and Brake Removal and Installation{0372, 0374, 4050, 4050, 4101, 4101, 4251, 4251} Caterpillar Track Type Tractor (D9 - D11) Technician ChecklistFinal Drive, Steering Clutch, and Brake Removal and Installation{0372, 0374, 4050, 4050, 4101, 4101, 4251, 4251}
621H OEM Wheel Tractor (Tier 4) Communication Electronic Control Module (Product Link)
Caterpillar Wheel Loader and Wheel Dozer (834 - 854, 992 - 994) Technician Checklist Engine and Torque Converter (TC) Removal and Installation {0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101} Caterpillar Wheel Loader and Wheel Dozer (834 - 854, 992 - 994) Technician Checklist Engine and Torque Converter (TC) Removal and Installation {0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101}
988K XE Wheel Loader Brake Accumulator
988K XE Wheel Loader Calibrations (Operator Monitor)
2013/06/13 New Fenders with Improved Gussets Are Now Used on Certain Grapple Skidders {7252}
2013/07/18 Bolts Have Been Added to the Sweep Mount Bracket on Certain Wheel Skidders {7162}
924K, 930K and 938K Wheel Loaders Alternator
924K, 930K and 938K Wheel Loaders Electronic Control Module (ECM)
Procedure to Rework the Start Relay Magnetic Switch on Certain Underground Articulated Trucks {7499} Procedure to Rework the Start Relay Magnetic Switch on Certain Underground Articulated Trucks {7499}
2013/06/10 Procedure to Rework the Alternator Guard Now Available for AD30 Underground Articulated Trucks {7174}
C13 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
C13 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install