2013/06/06 Caterpillar


An Alternate Fuel Line Is Available For Certain C18 Marine Engines {1274}

Usage:

C18 C1J
Generator Set:
C18 MARINE GS (S/N: CYN1-UP; GEN1-UP; MGS1-UP)
Marine Engine:
C18 MARINE (S/N: WKB1-UP; PLE1-UP; CKH1-UP; C1J1-UP; NAX1-UP; NAY1-UP)

Description of Change: The new alternative fuel line that connects the left-hand service simplex fuel filter to the front of the cylinder head will correct interference with surrounding components or excessive bend and twist stress. The new alternative fuel line that connects to the rear of the cylinder head on all filter arrangements will correct interference with surrounding components or excessive bend and twist stress.

Adaptable To: The new 419-9821 LINE AS and 423-8579 Line AS are now used to correct the interference with surrounding components.

ReferenceRefer to Special Instruction, REHS8172 for the correct installation instructions.

Table 1
Affected Serial Numbers    
S/N:C1J00001-01135    
S/N:CKH00001-03277    
S/N:CYN00001-00789    
S/N:GEN00001-00284    
S/N:MSG00001-00921    
S/N:NAY00001-00137    
S/N:PLE00001-00644    
S/N:WKB00001-00434    

Table 2
Effected Serial Numbers    
S/N:C1J01136-UP    
S/N:CKH03278-UP    
S/N:CYN00790-UP    
S/N:GEN00285-UP    
S/N:MSG00922-UP    
S/N:NAY00138-UP    
S/N:PLE00645-UP    
S/N:WKB00435-UP    

Caterpillar Information System:

C15 and C18 Tier 4 Final Engines Clean Emissions Module
Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F} Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F}
Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714} Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714}
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13 Engine for Caterpillar Built Machines Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
Procedure to Install A New Mounting Bracket Group for the Air Compressor on Certain C-18 Commercial Engines{1803} Procedure to Install A New Mounting Bracket Group for the Air Compressor on Certain C-18 Commercial Engines{1803}
Caterpillar Off-Highway Truck (777, 785, 789, 793, and 797) Technician Checklist Final Drive Removal and Installation {0372, 0374, 4001, 4001, 4011, 4011, 4050, 4050} Caterpillar Off-Highway Truck (777, 785, 789, 793, and 797) Technician Checklist Final Drive Removal and Installation {0372, 0374, 4001, 4001, 4011, 4011, 4050, 4050}
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Display Module Software - Install
Troubleshooting for Caterpillar Well Stimulation Pumps {5070} Troubleshooting for Caterpillar Well Stimulation Pumps {5070}
C7.1 Marine Generator Set General Hazard Information
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply DC Bus Capacitor - Remove and Install
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Error and Warning Messages
2013/06/03 New Fuel Lines Kits Are Used on Certain C9.3 Industrial Engines {1288}
2013/06/11 A New Prechamber and Gasket Are Available for Certain G3600 Engines {1106}
C9.3 Engines for Caterpillar Built Machines Inlet Module (Catalyst) - Remove and Install
C175 HAA Air System Lifting Device{0599, 0629, 0632, 1052, 1052} C175 HAA Air System Lifting Device{0599, 0629, 0632, 1052, 1052}
2013/07/22 New Exhaust Manifold Groups Are Available for Certain 3512C Petroleum Engines {1059}
Instructions for Determining Failed Active Power Module (APM) Inverter on Certain Uninterruptible Power Supplies{1418, 4822} Instructions for Determining Failed Active Power Module (APM) Inverter on Certain Uninterruptible Power Supplies{1418, 4822}
C13 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
C13 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Turbocharger - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Ignition Coil - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.