Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | -     | Loctite 771 Anti-Seize Compound     | -     |
- Disconnect harness assembly (1) . Cut any cable straps for this harness assembly.
Show/hide table
Illustration 1 | g02860158 |
Note: Mark the orientation of harness assembly (1) for assembly purposes.
- Remove temperature sensor (flame detect) (2) .
- Remove temperature sensor (DPF inlet) (3) . Cut any cable straps for the harness assembly.
Show/hide table
Illustration 2 | g02860178 |
Installation Procedure
- Install the temperature sensor (DPF inlet, flame detect) in the reverse order of removal.
Note: Always replace the metal cable straps with a comparable cable strap. Do not use plastic cable straps.
Note: Route harness assembly (1) in the original location to protect harness assembly from heat.
- Apply Tooling (A) to the threads on temperature sensor (flame detect) (2) and to the threads of temperature sensor (DPF inlet) (3) . Tighten temperature sensor (flame detect) (2) and temperature sensor (DPF inlet) (3) to a torque of 45 ± 5 N·m (33 ± 4 lb ft).
Caterpillar Information System:
Procedure to Install A New Mounting Bracket Group for the Air Compressor on Certain C-18 Commercial Engines{1803} Procedure to Install A New Mounting Bracket Group for the Air Compressor on Certain C-18 Commercial Engines{1803}
Caterpillar Off-Highway Truck (777, 785, 789, 793, and 797) Technician Checklist Final Drive Removal and Installation {0372, 0374, 4001, 4001, 4011, 4011, 4050, 4050} Caterpillar Off-Highway Truck (777, 785, 789, 793, and 797) Technician Checklist Final Drive Removal and Installation {0372, 0374, 4001, 4001, 4011, 4011, 4050, 4050}
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Display Module Software - Install
Troubleshooting for Caterpillar Well Stimulation Pumps {5070} Troubleshooting for Caterpillar Well Stimulation Pumps {5070}
C7.1 Marine Generator Set General Hazard Information
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply DC Bus Capacitor - Remove and Install
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Error and Warning Messages
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Machine Preparation for Troubleshooting
C7.1 Marine Generator Set Generator Isolating for Maintenance
C7.1 Marine Generator Set Engine Electronics
C7.1 Marine Generator Set Engine Starting
C175-16 Locomotive Engine Air Lines
C13, C15, and C18 Tier 4 Final Engines Turbocharger
Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714} Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714}
Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F} Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F}
C15 and C18 Tier 4 Final Engines Clean Emissions Module
2013/06/06 An Alternate Fuel Line Is Available For Certain C18 Marine Engines {1274}
2013/06/03 New Fuel Lines Kits Are Used on Certain C9.3 Industrial Engines {1288}
2013/06/11 A New Prechamber and Gasket Are Available for Certain G3600 Engines {1106}
C9.3 Engines for Caterpillar Built Machines Inlet Module (Catalyst) - Remove and Install
C175 HAA Air System Lifting Device{0599, 0629, 0632, 1052, 1052} C175 HAA Air System Lifting Device{0599, 0629, 0632, 1052, 1052}
2013/07/22 New Exhaust Manifold Groups Are Available for Certain 3512C Petroleum Engines {1059}
Instructions for Determining Failed Active Power Module (APM) Inverter on Certain Uninterruptible Power Supplies{1418, 4822} Instructions for Determining Failed Active Power Module (APM) Inverter on Certain Uninterruptible Power Supplies{1418, 4822}
C13 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install