Exhaust Combustion (ARD) and Mounting
Show/hide table
图 1 | g03376661 |
典型示例 |
Show/hide table
372-3931 排气燃烧和安装件总成 、 372-3930 排气燃烧和安装件总成 、 372-3908 排气燃烧和安装件总成 和 372-3929 排气燃烧和安装件总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 4     | 5C-2537 螺栓     | 在装配前,使用 Loctite 镍防咬合剂润滑螺纹和轴承表面。     |
2     | 1     | 295-3099 火花塞     | 拧紧至扭矩为 47.5 ± 4.0 N·m (35.0 ± 3.0 lb ft)。     |
3     | 2     | 348-3426 螺栓     | 在装配前,使用 Loctite 镍防咬合剂润滑螺纹和轴承表面。     |
4     | 6     | 293-4967 锥形锁紧螺柱     | 在装配前,使用 Loctite C5A 铜防咬合剂润滑螺纹和轴承表面。 拧紧至扭矩为 17 ± 2 N·m (150 ± 18 lb in)。     |
5     | 6     | 291-5204 锁紧螺母     | 按照以下步骤拧紧锁紧螺母,如图 1 中所示: 1. 以十字形样式将螺母拧紧至扭矩为 23 ± 3 N·m (204 ± 27 lb in)。 2. 以十字形样式将螺母拧紧至扭矩为 28 ± 3 N·m (248 ± 27 lb in)。 3. 再次以十字形样式将螺母拧紧至扭矩为 28 ± 3 N·m (248 ± 27 lb in)。     |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines
C13, C15, and C18 Tier 4 Final Engines Relay (ARD Nozzle Heater)
3516C HD Petroleum Well Service Engines Electronic Control Module (ECM)
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Electronic Service Tool Does Not Communicate
C7.1 Marine Generator Set Control Panel - EMCP 4.2 (If Equipped)
3512E Land Electric Drive Coolant (DEAC) - Change
3512E Land Electric Drive Coolant (ELC) - Change
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor - Exhaust Pipe Out
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor - Engine Exhaust Out
C280-16 Engine Fuel Filter Housings - Install
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
C13, C15, and C18 Tier 4 Final Engines Injector (Diesel Exhaust Fluid)
C280-16 Generator Set Engine for Nuclear Applications Aftercooler Coolant Temperature Is High
374F Excavator Hydraulic System Electronic Control (Swing System)
C32 Generator Set General Hazard Information
C280-16 Engine Engine Oil Coolers - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Valve (Water) - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Manifold Group (Front) - Remove and Install
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Manifold (Front) - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Manifold (Rear) - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Manifold Group (Rear) - Remove and Install
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Control Valve (Water) - Remove and Install