C13, C15, and C18 Tier 4 Final Engines Caterpillar


Manifold (Diesel Exhaust Fluid)

Usage:

826K 232


图 1g03371517
典型示例

表 1
389-2651 DEF 歧管总成、 389-2652 DEF 歧管总成和 389-2653 控制歧管总成的技术规格 
项目  数量  零件  技术规格说明 
422-8423 螺钉  如图 1 中所示,使用以下拧紧顺序:
将螺钉拧紧至扭矩为 5 ± 1 N·m (44 ± 9 lb in)
再次将螺钉拧紧至扭矩为 5 ± 1 N·m (44 ± 9 lb in)。 

Caterpillar Information System:

C4.4 and C7.1 Engines Injector Solenoid - Test
G3512H and G3516H Generator Set Engines Crankshaft Main Bearings - Remove and Install
C280 Marine Engines Engine Governing - Adjust
G3512H and G3516H Generator Set Engines Gear Group (Rear) - Remove and Install
G3512H and G3516H Generator Set Engines Flywheel Housing - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install
C280-16 Generator Set Engine for Nuclear Applications Speed Control
G3512H and G3516H Generator Set Engines Rocker Shaft and Push Rod - Remove and Install
C280-16 Generator Set Engine for Nuclear Applications Engine Speed/Timing Sensor
C280-16 Generator Set Engine for Nuclear Applications Camshaft Timing
G3500 Engines Piston and Rings
C9.3 Tier 4 Final Engines Cylinder Block Cover Group
3500 Engines Camshaft
G3512H and G3516H Generator Set Engines Pistons and Connecting Rods - Remove and Install
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electronic Service Tools
2013/11/25 A New Heavy-Duty Aftercooler is Available for Certain C32 Commercial Marine Engines Operating in Seawater {1063}
G3512H and G3516H Generator Set Engines Cylinder Liner - Remove and Install
3512B and 3512C Petroleum Generator Set Engines Air Cleaner
G3512H and G3516H Generator Set Engines Camshaft - Remove and Install
Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159} Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159}
3500 Engines Exhaust Elbow
2013/04/25 Clarification Of The Service Interval For The Connecting Rod Bearings For Certain C175-16 Marine Engines {1219}
G3512H and G3516H Generator Set Engines Crankshaft - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.