C13, C15, and C18 Tier 4 Final Engines Caterpillar

Exhaust Combustion (ARD)

Usage:

826K 232

Show/hide table




Illustration 1	g03369739

Show/hide table

Table 1
Specification for 355-0879 Exhaust Combustion Gp, 355-0875 Exhaust Combustion Gp, and 355-0879 Exhaust Combustion Gp
Item	Qty	Part	Specification Description
1	6	291-5204 Locknut	Use the following procedure to tighten the locknut 1 through the locknut 6 in the numerical sequence as shown in the Illustration 1: 1. Tighten in crisscross pattern to 23 ± 3 N·m (204 ± 27 lb in). 2. Tighten in crisscross pattern to 28 ± 3 N·m (248 ± 27 lb in). 3. Retighten in crisscross pattern to 28 ± 3 N·m (248 ± 27 lb in).
2	6	293-4967 Taperlock Stud	Before assembly, lubricate the threads and bearing surfaces with Loctite C5A Copper Anti-Seize. Torque to 17 ± 2 N·m (150 ± 18 lb in).
3	1	295-3099 Spark Plug	Torque to 57.5 ± 4.0 N·m (42.4 ± 3.0 lb ft).
4	2	342-1471 Connector	Torque to 30 ± 2 N·m (266 ± 18 lb in) within angle of rotation of 16 to 43 degrees from a pre-torque level of 10 N·m (89 lb in). Tighten the fitting to 30 ± 2 N·m (266 ± 18 lb in).
5	1	353-3312 Filter Adapter	Torque to 60 ± 6 N·m (44 ± 4 lb ft).
6	1	353-3311 Filter Adapter	Torque to 60 ± 6 N·m (44 ± 4 lb ft).

Show/hide table




Illustration 2	g03369748
433-3677 Combustion Head Gp

Show/hide table

Table 2
Item	Qty	Part	Specification Description
7⁽¹⁾	3	344-7833 Bolt	Use the following procedure to tighten the bolts for torque-turn method: 1. Tighten to 3.3 ± 0.5 N·m (29.2 ± 4.4 lb in) and then rotate the fastener to 45 ± 3 degrees. 2. Final turn on torque-turn method must meet 5.5 N·m (48.7 lb in). For torque method, tighten to 7.3 ± 1.0 N·m (64.6 ± 8.9 lb in).
8⁽¹⁾	1	342-1467 O-Ring Seal	Before assembly, lubricate the O-ring with clean oil.
9⁽¹⁾	1	342-1468 O-Ring Seal	Before assembly, lubricate the O-ring with clean oil.
10⁽¹⁾	1	342-1468 O-Ring Seal	Before assembly, lubricate the O-ring with clean oil.

Show/hide table

⁽¹⁾	Not serviced separately

Caterpillar Information System:

3500B Locomotive Engines Turbocharger

966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Transmission Planetary - Assemble

G3512H and G3516H Generator Set Engines Accessory Drive (Front) - Disassemble

374F Excavator Hydraulic System Electronic Control (Main Control Valve)

374F Excavator Hydraulic System General Information (Main Control Valve)

374F Excavator Hydraulic System Boom Cylinder

C280-16 Engine Emergency Stopping

C280 Marine, Marine Auxiliary, and Petroleum Engines Manual Stop Procedure

C280 Marine, Marine Auxiliary, and Petroleum Engines Starting the Engine

UPS 750 Uninterruptible Power Supply Maintenance Interval Schedule

C32 Generator Set Additional Messages

UPS 750 Uninterruptible Power Supply User Interface for System Cabinet

3500B Generator Set Engines Radiator

C9.3 Tier 4 Final Engines Exhaust Combustion (ARD)

C9.3 Tier 4 Final Engines Exhaust Lines (DPF Inlet)

C9.3 Tier 4 Final Engines Camshaft

3500B Locomotive Engines Air Lines

C9.3 Tier 4 Final Engines Piston and Rings

C9.3 Tier 4 Final Engines Temperature Sensor (DPF Inlet, Flame Detect)

C9.3 Tier 4 Final Engines Diesel Particulate Filter

C9.3 Tier 4 Final Engines Diesel Particulate Filter

C4.4 and C7.1 Engines Idle Validation - Test

C9.3 Tier 4 Final Engines Diesel Particulate Filter

3500B Generator Set Engines Engine Design