C7.1 Engines Caterpillar


Rocker Shaft and Pushrod - Remove

Usage:

525D 2L5

拆卸步骤

开始:

  1. 拆下气门机构盖。 请参考拆解和组装, "气门机构盖 - 拆卸和安装"以了解正确步骤。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 1g01340040


    图 2g03412377


    图 3g03373790
    摇臂轴拧紧顺序

  1. 按图 3 中所示的相反的数字顺序逐步拧松 torx 螺钉 (1)。

    注: 为了避免摇臂轴组件 (2) 变形,应一次松开每个 torx 螺钉半圈。 重复该程序,直到松开所有 torx 螺钉。

  2. 将 torx 螺钉 (1) 从摇臂轴组件 (2) 上拆下。

  3. 将摇臂轴组件 (2) 从缸盖上卸下。

  4. 为了显示位置,在推杆 (3) 上作一个识别标记。 从缸盖上卸下推杆。

    注: 识别标记能确保将推杆重新安装在原来的位置。 不要调换旧推杆的位置。

  5. 为了显示位置和朝向,在阀桥 (4) 上作一个临时标记。 将阀桥从缸盖上拆下。

    注: 识别标记能确保将阀桥重新安装在原来的位置和朝向。 请勿调换旧阀桥的位置或朝向。

Caterpillar Information System:

UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies AC Interface PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Power Distribution PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Parallel Cabinet Interface PWA
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Parallel Cabinet Controller PWA
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan Monitor PWA (MMS System Cabinet)
2013/03/22 A New Turbo Kit is Available for Certain 3500B Engines {1052, 1053}
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies EPO Reset Switch (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Purpose Interface PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Front Panel Display (MMS System Cabinet)
C7.1 Engines Rocker Shaft and Pushrod - Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System Fuses (MMS System Cabinet)
C7.1 Engines Rocker Shaft - Disassemble
C7.1 Engines Turbocharger - Install - Turbocharger for Side Mounted Engines
C7.1 Engines Turbocharger - Remove - Turbocharger for Side Mounted Engines
C7.1 Engines Turbocharger - Install - Turbocharger for Top Mounted Engines
C7.1 Engines Turbocharger - Remove - Turbocharger for Top Mounted Engines
C7.1 Engines Valve Mechanism Cover - Remove and Install
C7.1 Engines Valve Mechanism Cover Base - Remove and Install
C7.1 Engines Vibration Damper and Pulley - Install
C7.1 Engines Vibration Damper and Pulley - Remove
C7.1 Engines Wastegate Solenoid - Remove and Install
C7.1 Engines Water Pump - Install
C7.1 Engines Water Pump - Remove
C7.1 Engines Water Separator and Fuel Filter (Primary) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.