C7.1 Engines Caterpillar


Rocker Shaft - Disassemble

Usage:

525D 2L5

拆解步骤

开始:

  1. 拆下摇臂轴组件。 有关正确步骤,请参阅拆解和组装, "摇臂轴和推杆 - 拆卸"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


------ WARNING! ------

被弹簧力爆出的零件击中,会招致人员伤害。

确保穿上所有必要的保护装备。

遵照建议的程序,并使用所有建议的工具以释放弹簧力。


  1. 为了显示位置,在各个摇臂组件上作一个识别标记。

    注: 所有部件必须安装回原来的位置。 请勿交换使用部件。



    图 1g01340047

  2. 将基座 (1) 从摇臂轴 (1) 上拆下。 不需要将定位工具 (2) 从基座上拆下。

  3. 将排气门摇臂组件 (4) 从摇臂轴 (5) 上卸下。 将进气门摇臂组件 (3) 从摇臂轴 (5) 上卸下。 从摇臂轴组件后部开始。

    注: 进气门摇臂组件比排气门摇臂组件长。

  4. 将弹簧 (6) 从摇臂轴 (5) 上卸下。

  5. 重复步骤 3 和步骤 4,将其余的摇臂从摇臂轴 (5) 上拆下。


    图 2g01340048

  6. 如有必要,将固定夹 (7) 和弹簧 (8) 从摇臂轴 (5) 前端拆下。

  7. 如有必要,将螺母 (10) 和调节器 (9) 从摇臂上拆下。 为了显示位置,在各个调节器上作一个临时的识别标记。

    注: 所有部件必须安装回原来的位置。 请勿交换使用部件。

Caterpillar Information System:

UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Internal Component Preremoval Steps (MMS System Cabinet)
C7.1 Engines Rocker Shaft - Assemble
C7.1 Engines Relief Valve (Fuel) - Remove and Install
C7.1 Engines Refrigerant Compressor - Remove and Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Information (MMS System Cabinet)
C7.1 Engines Rear Power Take-Off (RPTO) - Remove
C7.1 Engines Rear Power Take-Off (RPTO) - Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Gen Set Module Circuit Breaker (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies External Source Sync Relay and Terminal Block
C7.1 Engines Pistons and Connecting Rods - Remove
C7.1 Engines Pistons and Connecting Rods - Install
C7.1 Engines Pistons and Connecting Rods - Disassemble
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System Fuses (MMS System Cabinet)
C7.1 Engines Rocker Shaft and Pushrod - Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Front Panel Display (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Purpose Interface PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies EPO Reset Switch (MMS System Cabinet)
2013/03/22 A New Turbo Kit is Available for Certain 3500B Engines {1052, 1053}
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan Monitor PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Parallel Cabinet Controller PWA
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Parallel Cabinet Interface PWA
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Power Distribution PWA (MMS System Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies AC Interface PWA (MMS System Cabinet)
C7.1 Engines Rocker Shaft and Pushrod - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.