C7.1 Engines Caterpillar


Lifter Group - Remove and Install

Usage:

525D 2L5

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
(1) 9U-6198  曲轴转动工具 
(2) 9U-7336  壳体组件 
5P-7305 发动机盘车工具 
1U-7262  伸缩式磁铁 
(1) 曲轴转动工具用于前皮带轮。
(2) 该工具在电动起动马达的孔上使用。

开始:

  1. 拆下发动机机油泵。 有关正确的步骤,请参阅拆解和组装, "发动机机油泵 - 拆卸"。

  2. 拆下凸轮轴。 有关正确步骤,请参阅拆解和组装, "交流凸轮轴 - 拆卸和安装"。

注: 可以使用两个工具 (A) 中的任意一个。 请使用最适用的工具。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


  1. 如果安装了曲轴,使用工具 (A) 转动曲轴,以接近相应挺杆 (1)。


    图 1g01340518

  2. 使用工具 (B) 拆卸挺杆 (1)。

    注: 在各挺杆上作临时识别标记,以确定正确位置。

  3. 重复步骤 1 到步骤 2,卸下其余的挺杆。

安装步骤

表 2
所需工具 
工具  零件号  零件描述  数量 
(1) 9U-6198  曲轴转动工具 
(2) 9U-7336  壳体组件 
5P-7305 发动机盘车工具 
1U-7262  伸缩式磁铁 
(1) 曲轴转动工具用于前皮带轮。
(2) 该工具在电动起动马达的孔上使用。

注: 可以使用两个工具 (A) 中的任意一个。 请使用最适用的工具。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

强烈推荐应在安装新凸轮轴时更换所有的挺杆。


  1. 清洁挺杆。 遵循步骤 1.a 至步骤1.c 检查挺杆。 更换任何磨损的挺杆或损坏的挺杆。

    1. 检查挺杆中的推杆座有无可见的磨损或损坏。

    2. 检查挺杆柄有无磨损或损坏。 更多信息请参阅技术参数, "挺杆总成"。

    3. 检查挺杆接触凸轮轴的表面有无可见的磨损或损坏。

  2. 如果安装了曲轴,使用工具 (A) 转动曲轴接近缸体,以便安装相应挺杆 (1)。

  3. 使用清洁的发动机机油润滑挺杆 (1)。


    图 2g01340518

  4. 使用工具 (B) 将挺杆 (1) 安装到缸体上。 确保旧挺杆安装位置正确。

    注: 挺杆应能自由转动。

  5. 重复步骤 1 和步骤 4,安装其余挺杆。

结束:

  1. 安装凸轮轴。 有关正确步骤,请参阅拆解和组装, "交流凸轮轴 - 拆卸和安装"。

  2. 安装发动机机油泵。 有关的正确步骤,请参阅拆解和组装, "发动机机油泵 - 安装"。

Caterpillar Information System:

C3.3B Tier 4 Final Engines for Caterpillar Built Machines Fuel Injector
C7.1 Engines Inlet Manifold - Remove and Install
C7.1 Engines Inlet and Exhaust Valves - Remove and Install
C7.1 Engines Inlet and Exhaust Valve Springs - Remove and Install
C7.1 Engines Inlet Air Temperature Sensor - Remove and Install
C7.1 Engines Idler Pulley - Remove and Install - Grooved Idler Pulley
C7.1 Engines Idler Pulley - Remove and Install - Flat Idler Pulley
C7.1 Engines Idler Gear - Remove
C7.1 Engines Idler Gear - Install
C7.1 Engines Housing (Front) - Remove
C7.1 Engines Housing (Front) - Remove - Heavy Duty Housing (Front)
C7.1 Engines Housing (Front) - Install
C7.1 Engines Piston Cooling Jets - Remove and Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies System Fuse (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan Transformer
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Isolation Switches
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Fan (Input/Output Cabinet)
C7.1 Engines Pistons and Connecting Rods - Assemble
C7.1 Engines Pistons and Connecting Rods - Disassemble
C7.1 Engines Pistons and Connecting Rods - Install
C7.1 Engines Pistons and Connecting Rods - Remove
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies External Source Sync Relay and Terminal Block
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Gen Set Module Circuit Breaker (Input/Output Cabinet)
C7.1 Engines Rear Power Take-Off (RPTO) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.