A New Bracket Is Available for Certain C18 Marine Engines Equipped with Right Hand Service Duplex Fuel Filter Arrangements {1261}
- Marine Engine:
- C18 (S/N: T2P1-UP)
The new bracket extends to support the duplex fuel filter assembly, reducing fatigue stress on the duplex mounting bracket and the exhaust manifold.
Note: To utilize the new bracket, machining the weld nuts on the existing duplex mounting bracket is required along with the use of new hardware.
The new 424-2057 Bracket is adaptable back to first production on the serial numbers listed above. Refer to Table 1 for a list of parts required to install the new 424-2057 Bracket.
Show/hide table
 | |
| Illustration 1 | g03345290 |
(1) 424-2057 Bracket (2) 0S-1594 Bolt (3) 5M-2894 Hard Washers (4) 0S-1571 Bolts (5) 9S-8752 Full Nuts | |
Show/hide table
| New Part Number | Description | Quantity |
| 424-2057 | Bracket | 1 |
| 0S-1594 | Bolt | 1 |
| 5M-2894 | Hard Washers | 3 |
| 0S-1571 | Bolts | 2 |
| 9S-8752 | Full Nuts | 2 |
Caterpillar Information System:
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Configuration Parameters
C18 Industrial Engine Injector Solenoid - Test
C32 Generator Set Declaration of Conformity
C11, C13, C15, and C18 Industrial Engines Ether Starting Aid - Test
C18 Industrial Engine Electrical Power Supply - Test
C18 Industrial Engine Data Link Configuration Status - Test
C18 Industrial Engine Coolant Level - Test
C18 Industrial Engine Air Shutoff - Test
Installing the 387-8211 Thermostatic Valve Gp and the 387-8214 Thermostatic Valve Gp onto C175 Engines{135V, 7610} Installing the 387-8211 Thermostatic Valve Gp and the 387-8214 Thermostatic Valve Gp onto C175 Engines{135V, 7610}
C7.1 Engines for Caterpillar Built Machines Engine Design
C7.1 Engines for Caterpillar Built Machines Fuel Injection Lines
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
C7.1 Marine Engine Pistons and Connecting Rods - Remove and Install
C7.1 Marine Engine Pistons and Connecting Rods - Disassemble
C7.1 Marine Engine Pistons and Connecting Rods - Assemble
C7.1 Marine Engine Connecting Rod Bearings - Remove and Install - Connecting rods in position
C9.3 Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
C9.3B Engines Flywheel Housing Cover
3500B Generator Set Engines Turbocharger
3500B Generator Set Engines Generator Coupling
3500B Generator Set Engines Generator Coupling
C4.4 Industrial Engine Alarms and Shutoffs
C27 Generator Set Declaration of Conformity
C7.1 Engines for Caterpillar Built Machines Gear Group (Front)