C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Water Pump

Usage:

826K 2L3


图 1g03344797

表 1
技术规格 - 384-4520 水泵总成 
项目  数量  零件  技术规格说明 
9M-3786 O 形密封圈  使用 5P-3975 橡胶润滑剂稍稍润滑孔。 
0S-1591 螺栓  拧紧至扭矩为 39 ± 3 N·m (29 ± 2 lb ft)。 
349-2654 水泵密封件  使用安装工具将水泵密封件压装到水泵轴上,直到固定杯完全座入泵壳体内。 
153-1256 唇形密封  用安装工具安装唇形密封件,使主密封唇朝向水泵驱动齿轮。 压装唇形密封件,直到唇形密封件与壳体内表面齐平。 使用压具安装唇形密封件,不要用手安装唇形密封件。 
135-4928 水泵轴  在防积碳密封件组件底座区的水泵轴直径为 19.100 ± 0.010 mm (0.7520 ± 0.0004 inch)。 

Caterpillar Information System:

C7.1 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C7.1 Engines for Caterpillar Built Machines Valve Mechanism Cover
C7.1 Industrial Engine Sensors and Electrical Components
C4.4 Industrial Engine Monitoring System
C4.4 Industrial Engine Gauges and Indicators
C4.4 Industrial Engine Product Lifting
C18 Marine Propulsion Engines Turbocharger
C7.1 Marine Engine Crankshaft - Remove and Install
C7.1 Marine Engine Engine Oil Pan - Remove and Install
C7.1 Marine Engine Rocker Shaft and Push Rod - Remove and Install
2013/02/06 A New Turbocharger Coolant Line Is Used on Certain 3512C Locomotive Engines {1380}
C7.1 Marine Engine Valve Mechanism Cover - Remove and Install
C18 Marine Propulsion Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
Procedure to Install Water Delivery System (Retrofit) (S/N: M6J) on the 777G WTR {5612, 7000} Procedure to Install Water Delivery System (Retrofit) (S/N: M6J) on the 777G WTR {5612, 7000}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
C7.1 Engines for Caterpillar Built Machines Fuel Injection Lines
C7.1 Engines for Caterpillar Built Machines Engine Design
Installing the 387-8211 Thermostatic Valve Gp and the 387-8214 Thermostatic Valve Gp onto C175 Engines{135V, 7610} Installing the 387-8211 Thermostatic Valve Gp and the 387-8214 Thermostatic Valve Gp onto C175 Engines{135V, 7610}
C18 Industrial Engine Air Shutoff - Test
C18 Industrial Engine Coolant Level - Test
C18 Industrial Engine Data Link Configuration Status - Test
C18 Industrial Engine Electrical Power Supply - Test
C11, C13, C15, and C18 Industrial Engines Ether Starting Aid - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.