Turbocharger
Show/hide table
Illustration 1 | g03344435 |
Show/hide table
Specification for 371-2736 Turbocharger Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 8     | 2N-2766 Locknut     | Before assembly, apply Loctite C5A Copper Anti-Seize to the threads and bearing surfaces. Torque to 54 ± 5 N·m (40 ± 4 lb ft).     |
2     | 1     | 127-0839 Clamp As     | Use the following procedure to tighten the clamp assemblies: 1. Tighten to 14 ± 1 N·m (124 ± 9 lb in). 2. Gently tap around the clamp assemblies with a soft faced hammer. 3. Again, tighten to 14 ± 1 N·m (124 ± 9 lb in).     |
3     | 1     | 7W-7778 Clamp As     |
Caterpillar Information System:
C7.1 Marine Engine Crankshaft - Remove and Install
C7.1 Marine Engine Engine Oil Pan - Remove and Install
C7.1 Marine Engine Rocker Shaft and Push Rod - Remove and Install
2013/02/06 A New Turbocharger Coolant Line Is Used on Certain 3512C Locomotive Engines {1380}
C7.1 Marine Engine Valve Mechanism Cover - Remove and Install
C32 Auxiliary Engine Fuel System Secondary Filter - Replace
C7.1 Marine Engine Housing (Front) - Remove and Install
C7.1 Marine Engine Idler Gear - Remove and Install
C7.1 Marine Engine Gear Group (Front) - Remove and Install
C175-16 Locomotive Engine Oil Contains Coolant
C175-16 Locomotive Engine Fuel Pressure Is Low - Fuel Supply System
C175-16 Locomotive Engine Fuel Pressure Is High - Fuel Supply System
C4.4 Industrial Engine Product Lifting
C4.4 Industrial Engine Gauges and Indicators
C4.4 Industrial Engine Monitoring System
C7.1 Industrial Engine Sensors and Electrical Components
C7.1 Engines for Caterpillar Built Machines Valve Mechanism Cover
C7.1 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C15 and C18 Engines for Caterpillar Built Machines Water Pump
C18 Marine Propulsion Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
Procedure to Install Water Delivery System (Retrofit) (S/N: M6J) on the 777G WTR {5612, 7000} Procedure to Install Water Delivery System (Retrofit) (S/N: M6J) on the 777G WTR {5612, 7000}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System - Set
C7.1 Engines for Caterpillar Built Machines Fuel Injection Lines