2012/12/13 Caterpillar


An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}

Usage:

769C 01X
Agricultural Tractor:
MT855 (S/N: BCC1-UP; A3A1-UP)
MT865 (S/N: BDS1-UP; GDA1-UP)
MTC855 (S/N: 8181-UP)
MTC865 (S/N: 8191-UP)
Articulated Truck:
735 (S/N: WWC1-UP; B1N1-UP)
735B (S/N: L4D1-UP; T4P1-UP)
740 (S/N: WWD1-UP; B1P1-UP)
740 EJECTOR (S/N: B1R1-UP)
740B (S/N: L4E1-UP; GLH1-UP; T4R1-UP; E4S1-UP)
740B EJECTOR (S/N: L4F1-UP; T4S1-UP)
D400D (S/N: 8TF1-UP)
Cold Planer:
PM-200 (S/N: P1C1-UP)
PM-201 (S/N: PNM1-UP)
PM-465 (S/N: 5ZS1-UP)
PM200 (S/N: P1M1-UP)
Landfill Compactor:
826C (S/N: 87X1-UP)
826G (S/N: 7LN1-UP)
826H (S/N: AWF1-UP)
836G (S/N: BRL1-UP; 7MZ1-UP)
836H (S/N: BXD1-UP)
836K (S/N: TWZ1-UP)
Soil Compactor:
825G (S/N: 6RN1-UP)
825H (S/N: AZW1-UP)
Excavator:
330C (S/N: CYA1-UP)
365C (S/N: ELC1-UP; GWC1-UP; MEM1-UP; FEN1-UP; PAR1-UP; MCS1-UP; MCY1-UP)
374D (S/N: PJA1-UP; PAP1-UP; PAS1-UP; PAX1-UP)
374F (S/N: DNM1-UP)
375 (S/N: 8XG1-UP; 8WJ1-UP; 6NK1-UP; 6RL1-UP)
375L (S/N: 9WL1-UP; 1JM1-UP)
385B (S/N: MYA1-UP; RCD1-UP; BKF1-UP; FDL1-UP; ANS1-UP; CLS1-UP; BKX1-UP; BLY1-UP)
385C (S/N: EDA1-UP; MMA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; T2E1-UP; T2F1-UP; KKK1-UP; EAM1-UP; JCM1-UP; WAW1-UP; MNZ1-UP)
390D (S/N: WAG1-UP; BYP1-UP; WAP1-UP; WBT1-UP; KCZ1-UP)
5080 (S/N: 6XK1-UP; 8SL1-UP)
5090B (S/N: CLD1-UP; SJY1-UP)
Load Haul Dump:
R2900G (S/N: JLK1-UP)
Motor Grader:
16G (S/N: 93U1-UP)
16H (S/N: 6ZJ1-UP)
24M (S/N: B9K1-UP)
Mobile Hydraulic Power Unit:
365C MHPU (S/N: GSZ1-UP)
374D MHPU (S/N: JNZ1-UP)
385C MHPU (S/N: M4E1-UP; MSF1-UP; M3P1-UP; M3W1-UP)
390D MHPU (S/N: M1M1-UP)
Off-Highway Truck/Tractor:
770 (S/N: M7W1-UP; BZZ1-UP)
770G (S/N: KDH1-UP; ECM1-UP)
772 (S/N: RLB1-UP; J2M1-UP)
772G (S/N: LTS1-UP; KEX1-UP)
Pipelayer:
583R (S/N: 2XS1-UP)
583T (S/N: CMX1-UP)
587R (S/N: BXL1-UP)
587T (S/N: FAT1-UP)
PL83 (S/N: KSD1-UP)
PL87 (S/N: KKJ1-UP)
Reclaimer Mixer:
RM-250C (S/N: AWG1-UP)
Road Reclaimer/Soil Stabilizer:
RM-350B (S/N: AXW1-UP)
RM-500 (S/N: ASW1-UP)
RM350B (S/N: 7FS1-UP)
RR-250B (S/N: 3RR1-UP)
Track-Type Tractor:
D8R (S/N: 7XM1-UP; 9EM1-UP)
D8T (S/N: J8B1-UP; MLN1-UP; FCT1-UP; KPZ1-UP)
D9T (S/N: TWG1-UP; RJS1-UP)
Underground Articulated Truck:
AD30 (S/N: DXR1-UP)
AD45B (S/N: CXM1-UP)
AD55 (S/N: ANW1-UP; DNW1-UP)
Wheel Dozer:
824G (S/N: 4SN1-UP)
824H (S/N: ASX1-UP)
834G (S/N: BPC1-UP; 6GZ1-UP)
834H (S/N: BTX1-UP)
834K (S/N: LWY1-UP; TWY1-UP)
Wheel Loader:
980G (S/N: 9CM1-UP; 2KR1-UP; 2SR1-UP)
980HSeries 2 (S/N: MKP1-UP)
980H (S/N: MHG1-UP; A8J1-UP; KZL1-UP; JMS1-UP)
988GSeries RTCH (S/N: 1NZ1-UP)
988G (S/N: BNH1-UP; 2TW1-UP)
988H (S/N: A7A1-UP; BXY1-UP)
988K (S/N: LWX1-UP; TWX1-UP)
Wheel Tractor-Scraper:
621F (S/N: 4SK1-UP; 8PL1-UP)
621G (S/N: DBB1-UP; DXB1-UP; KJW1-UP)
623B (S/N: 46P1-UP)
623F (S/N: 5EW1-UP)
623G (S/N: DBC1-UP)
627F (S/N: 1DL1-UP)
627G (S/N: DBD1-UP)
631G (S/N: DFA1-UP; DXE1-UP; M1W1-UP)
637G (S/N: DFJ1-UP)
657G (S/N: W1B1-UP; W1C1-UP; W1E1-UP; W1F1-UP; A4G1-UP; DXG1-UP; GER1-UP; GRS1-UP)
Service Magazine, SEPD1541, 13 December 2012, "An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines". Disregard the previous article. Effectivity has been added, refer to the article that follows.

Referenced to Testing and Adjusting, "Gear Group (Front) - Time" for the new timing procedure.

Caterpillar Information System:

2013/01/03 Allow Moisture to Drain from the Fuel Metering Valves on Certain G3500 Engines {1254, 1714, 5086}
PM3516 Power Modules Coolant Level - Check
390F Excavator Lifting Capacities
C13 Tier 4 Final Engines Gear Group (Rear)
3500 Industrial Engines Air Starting Motor
C1.5 and C2.2 Industrial Engines Valve Position Sensor - Test
3508B Industrial Engines Aftercooler Water Lines
421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000} 421-9727 Top End Engine Overhaul Kit for 3412D Marine Engines{1000}
2012/12/14 New Software Is Used by Certain 3500C Locomotive Engines {1901, 1920}
3508B Industrial Engines Water Lines
3508B Industrial Engines Flywheel
C1.5 and C2.2 Industrial Engines ECM Memory - Test
2012/12/14 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
Marine Multi-Station Control System Button Panel - Test
2012/12/21 An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, and C15 Engines {1206}
PM3516 Power Modules Coolant (DEAC) - Change
PM3516 Power Modules Coolant (ELC) - Change
2012/12/10 3412 Marine Engine Overhaul Kits Are Available for Top End and Major Overhauls {1000}
374F Excavator Machine System Joystick Control
C13 Tier 4 Final Engines Gear Group (Rear)
419-8232 Major Engine Overhaul Kit for 3412C Marine Engines{1000} 419-8232 Major Engine Overhaul Kit for 3412C Marine Engines{1000}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Pressure Is High - Diesel System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Air Cleaner
C13 Tier 4 Final Engines Exhaust Elbow
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.