2012/10/08 Caterpillar


An Improved Hand Operated Fuel Priming Pump Is Available {1258}

Usage:

769C 01X
Caterpillar Products:
  • All
  • The improved 162-3906 Fuel Priming Pump As, 137-5541 Fuel Priming Pump Gp and 183-2823 Fuel Priming Pump As have a different shaft and seal materials, along with tighter tolerances on internal components. The new priming pump improves initial fuel priming and helps prevent a loss of engine fuel priming when the machine is not operational.

    The new hand operated fuel priming pump is adaptable back to the first production on the products listed above.

    The new priming pump assembly can be identified by the manufacturer date code. All pumps with date codes stamped on or after 17September 2012 are the new design. Refer to Illustration 1 and Table 1 in order to identify the date codes.




    Illustration 1g03276516

    Manufacturer date code on fuel priming pump assembly. Date code "TJS": T = 2012, J = September, S = 17

    Table 1
    Year     Month     Day    
    1995 = A     January = A     1 = A    
    1996 = B     February = B     2 = B    
    1997 = C     March = C     3 = C    
    1998 = D     April = D     4 = D    
    1999 = E     May = E     5 = E    
    2000 = F     June = F     6 = F    
    2001 = G     July = G     7 = G    
    2002 = H     August = H     8 = H    
    2003 = J     September = J     9 = J    
    2004 = K     October = K     10 = K    
    2005 = L     November = L     11 = L    
    2006 = M     December = M     12 = M    
    2007 = N     -     13 = N    
    2008 = P     14 = P
    2009 = Q     15 = Q
    2010 = R     16 = R
    2011 = S     17 = S
    2012 = T     18 = T
    2013 = U     19 = U
    2014 = V     20 = V
    2015 = W     21 = W
    2016 = X     22 = X
    2017 = Y     23 = Y
    2018 = Z     24 = Z
    -     25 = 1
    26 = 2
    27 = 3
    28 = 4
    29 = 5
    30 = 6
    31 =7

    Caterpillar Information System:

    3500 Generator Sets with Dynamic Gas Blending Fluid Recommendations
    C13, C15, and C18 Tier 4 Final Engines SCR Catalyst Inlet Temperature Sensor - Test
    C13, C15, and C18 Tier 4 Final Engines NOx Conversion Is Low
    C13, C15, and C18 Tier 4 Final Engines DEF Control Module Power - Test
    2012/10/15 Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
    2012/10/11 Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
    2012/10/30 A New Pressure Relief Valve for the Fuel Rail Group Is Used in Certain C9.3 Industrial Engines {1288}
    C1.5 and C2.2 Industrial Engines Customer Specified Parameters Worksheet
    C175-16 Generator Set Engine Engine Oil Pan - Remove and Install
    C175-16 Generator Set Engine Engine Oil Screen - Remove and Install
    C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Assemble
    G3520E Generator Set Engines Water Lines
    3500 Generator Sets with Dynamic Gas Blending Starting the Engine - Natural Gas
    2012/10/08 An Improved Hand Operated Fuel Priming Pump Is Available {1258}
    C32 Marine Engines Electric Starting Motor - Remove and Install
    2012/10/11 Correction to Part Numbers Specific to Generator Arrangement for Certain XQ80 and XQ100 Rental Generator Sets {4450}
    3512B and 3512C Petroleum Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
    2012/10/18 Improved EMCP4 Software is Now Used on Certain C4.4, C6.6 Cat® Generator Sets {7620}
    3512B and 3512C Petroleum Generator Set Engines Engine Overspeeds
    3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Exhaust Temperature Is High
    Alternator - Bosch K1/N1 Alternator Will Not Charge
    Alternator - Bosch K1/N1 Alternator Charge Rate Is Low
    Alternator - Bosch K1/N1 Alternator Charge Rate Is High
    Alternator - Bosch K1/N1 Alternator Is Noisy
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.