Lift Arms - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1P-1860 | Retaining Ring Pliers | 1 |
B | 1U-9200 | Lever Puller Hoist | 1 |
C | 140-7742 | Sleeve | 2 |
- Lower the temperature of bearings (13). Install bearings (13).
Show/hide table
Illustration 2 g01248265 - Lower the temperature of bearings (12). Install bearings (12).
Show/hide table
Illustration 3 g01248263 - Lower the temperature of bearings (11). Install bearings (11).
Show/hide table
Illustration 4 g01383377 Show/hide tableIllustration 5 g03210058 - Attach Tooling (B), Tooling (C), and a suitable lifting device to lift arms (1). The weight of lift arms (1) is approximately
460 kg (1015 lb) . Install lift arms (1).Show/hide tableIllustration 6 g03210062 - The weight of pin (10) is approximately
27 kg (60 lb) . Use two people to install pin (10) and any shims that were present. - Install plate (9). Repeat for the other side.
Show/hide table
Illustration 7 g01383339 - Place harness assembly (8) into position. Connect harness assembly (8) and install cable straps (7).
Show/hide table
Illustration 8 g01383329 - Connect hose assemblies (5) and (6) to each side of the machine.
Show/hide table
Illustration 9 g01247934 - Attach a suitable lifting device to the rod end of lift cylinder (4). The weight of lift cylinder (4) is approximately
60 kg (132 lb) . Use the suitable lifting device in order to raise the rod end of lift cylinder (4) into position in lift arms (1). Install pin assembly (3). Use Tooling (A) in order to remove retaining ring (2). Repeat for the other side.
Show/hide table
Illustration 1 | g01248315 |
End By:
- Install the bucket.
- Install the tilt cylinder.
Caterpillar Information System:
450F Backhoe Loader Hydraulic and Steering System Gear Pump (Implement) - Supplemental
MH3049 Material Handler Hydraulic System Check Valve (Return Makeup)
450F Backhoe Loader Hydraulic and Steering System Hydraulic Tank and Filter
450F Backhoe Loader Machine Systems Lift Arms - Remove
770G and 772G Off-Highway Truck/Tractors Backlight Is On Continuously
450F Backhoe Loader Machine Systems Multipurpose Bucket - Remove and Install
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Safety Messages
770G and 772G Off-Highway Truck/Tractors Backlight Does Not Illuminate
770G and 772G Off-Highway Truck/Tractors Hydraulic Fan System
MH3049 Material Handler Hydraulic System General Information (Boom System)
247-1400 Front Conversion Ar for Certain Vibratory Soil Compactors{5050, 5612, 5622, 7000} 247-1400 Front Conversion Ar for Certain Vibratory Soil Compactors{5050, 5612, 5622, 7000}
2012/09/10 Loctite Added to Yoke Bolts on Certain Wheel Loaders and Underground Mine Machines {3075, 3159}
450F Backhoe Loader Hydraulic and Steering System Ride Control Accumulator - Test and Charge
450F Backhoe Loader Hydraulic and Steering System Worksheets - Troubleshoot
MH3049 Material Handler Hydraulic System Electronic Control (Fan Hydraulic System)
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Cab - Remove
422F, 428F, 432F, 434F and 444F Backhoe Loaders Machine Systems Cab - Install
770G and 772G Off-Highway Truck/Tractors Electrical Connector - Inspect
770G and 772G Off-Highway Truck/Tractors ECM Software - Install
770G and 772G Off-Highway Truck/Tractors ECM - Configure
770G and 772G Off-Highway Truck/Tractors ECM - Replace
450F Backhoe Loader Hydraulic and Steering System General Information (Hydraulic System)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Relief Valve (Pump Backup)
R3000H Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Disassemble