Cylinder Head Valves
Show/hide table
Illustration 1 | g03199556 |
Show/hide table
Specification for 184-4976 Cylinder Head Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 7N-1904 Spring | Length under test force is Test force is Free length after test is |
2 | 4 | 7N-1903 Spring | Length under test force is Test force is Free length after test is |
A | - | - | Height from the top of the cylinder head to the top of the valve guides is |
3 | 4 | - | Before assembly, coat the valve stems with clean engine oil.
Stem diameter (B) is Valve diameter (C) is Face angle is 70.75 ± 0.25 degrees. |
4 | 2 | 184-5494 Valve Guide | Bore of the exhaust valve guide after installation is |
5 | 2 | 184-5495 Valve Guide | Bore of the inlet valve guide after installation is |
6 | 2 | 6I-1713 Valve Seat Insert | Diameter of exhaust valve seat insert is Bore in the cylinder head is Face angle is 20 degrees. |
7 | 2 | 206-4484 Valve Seat | Diameter of inlet valve seat insert is Bore in the cylinder head is Face angle is 20.00 ± 0.50 degrees. |
Caterpillar Information System:
G3500 Engines Stub Shaft (Front)
G3500 Engines Gear Group (Rear)
3500 Industrial Engines Gear Group (Rear)
C32 Auxiliary Engine Starting the Engine
2012/10/30 An Improved One Piece Torque Converter Housing is Used on Certain CX31 and CX35 Transmissions {3105}
2012/08/24 An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
C18 Marine Engine Model View Illustrations
320D2 Excavator Engine Oil Level - Check
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805} 256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805} 256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805} 398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805} 398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
C7.1 Marine Generator Set Control Panel - Marine Classification Society (MCS) Control Panel (If Equipped)
G3500 Engines Cylinder Head Valves
2012/12/06 A New Outlet Elbow Is Used with the Oil Cooler Adapter on Certain 3516B and 3516C Engines {1380}
G3516 Engines Accessory Drive (Lower Left Hand)
C175-16 Locomotive Engine Fuel Transfer Pump - Install
330F MHPU Mobile Hydraulic Power Unit Machine System Hydraulic Tank and Filter
G3500 Engines Gear Group (Rear)
G3500 Engines Gear Group (Rear)
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Fuel System
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Air Inlet and Exhaust System
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Aftercooler
C175-16 Locomotive Engine High Pressure Fuel Rails - Remove and Install